NATI BlueMAX 53542 Manual

Gasoline pole saw

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Gasoline Pole Saw

Model: 53542

*Actual product may vary slightly

Please carefully read and save these instructions before appempting to assemble, maintain, install, or operate this product.

Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property

damage and/or personal injury. Please keep instructions for future reference.

For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.

For Customer Service, Call 1-800-348-5004

88053542

07/2015

or e-mail feedback@natitools.com

Table of Contents

Need help?

Do you have a question about the BlueMAX 53542 and is the answer not in the manual?

Questions and answers

mike dickson

July 21, 2025

where can i get replace parts. i need clutch cover

Summary of Contents for NATI BlueMAX 53542

Page 1 Gasoline Pole Saw Model: 53542 *Actual product may vary slightly Please carefully read and save these instructions before appempting to assemble, maintain, install, or operate this product. Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property damage and/or personal injury.
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the solar panel kit safely and effectively. Please read and follow these instructions and precautions carefully. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
Page 3 9 10 20 19 feedback@natitools.com 1-800-348-5004...
Page 4 feedback@natitools.com 1-800-348-5004...
Page 5 2 mm feedback@natitools.com 1-800-348-5004...
Page 6 feedback@natitools.com 1-800-348-5004...
Page 7 feedback@natitools.com 1-800-348-5004...
Page 8 feedback@natitools.com 1-800-348-5004...
Page 9: Safety Information
Watch out for falling and catapulting Important! parts. When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating Read the directions for use before instructions and safety regulations with due care. operating the equipment.
Page 10: Layout And Items Supplied
2. Layout and items supplied • Original operating instructions • Safety information 2.1 Layout 3. Intended use 1. Cutter bar 2. Saw chain 3a. Oil tank / cap The pole-mounted petrol-powered pruner is 3b. Gear unit 4. Drive rod mechanism suitable for extensive sawing work, felling trees 5.
Page 11 the guard cap (Item N) and tighten the handle The impact of noise can cause damage to screw. To take apart, undo the handle screw and hearing. open the guard cap. Press the centering lever and simultaneously pull the drive rod mechanism out In operation of the connecting piece.
Page 12: Before Starting
6.3 Chain lubrication length changes. It is important therefore to check the chain tension at least every 10 minutes and Important! Never operate the chain if it is not to adjust it again as required. This applies in lubricated with saw chain oil. Use of the chainsaw particular to new saw chains.
Page 13: Working With The Chainsaw
starter cable (Fig. 2/Item 13) until you feel it “0“. begin to resist. Then tug sharply on the starter cable 4 times. The equipment should start. Normal procedure: Important: Never allow the starter cable to Let go of the throttle lever and wait until the snap back.
Page 14 elements: The sharper the chain, the easier and Never cut into the bulging branch collar. This will more controllable it is to operate the chainsaw. prevent the tree from healing. The same also applies to the chain tension. For greater safety you must check the chain tension before your work and at least every 10 minutes Place the contact surface of the saw onto the during your work.
Page 15: Maintenance
instructions. sharp. • Never cut with the upper edge or the tip of the This also reduces the risk of kickback. cutter bar. The chain can be re-sharpened by any dealer. Do not attempt to sharpen the chain yourself unless hands.
Page 16: Disposal And Recycling
Note: Store the equipment in a dry place and for cleaning. • Keep the handles free of oil so that you can far away from possible ignition sources such as • Clean the equipment as required with a damp dryer, etc. cloth and, if necessary, mild washing up Putting the equipment back into operation liquid.
Page 17: Troubleshooting Guide
12. Troubleshooting guide The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment fails to work properly. If the problem still persists after working through the list, please contact your nearest service workshop. Fault Possible cause Remedy...
Page 18: Limited Manufacturer Warranty
To receive service under warranty, the original manufacturer part must be returned for examination by an authorized service center. Shipping and handling charges may apply. If a defect is found, NATI will either repair or replace the product at its discretion.