Plugging In This Unit - Yamaha RX-V795aRDS Owner's Manual

Plugging in this unit

• After completing all connections, plug the AC power cord
into an AC outlet.
(*1)
(*1):
AC OUTLET(S)
(Europe model).................................. 2 SWITCHED OUTLETS
(U.K. model)......................................... 1 SWITCHED OUTLET
Use these to connect the power cords of your components to
this unit.
The power to the SWITCHED outlets is controlled by this unit's
STANDBY/ON switch or the remote controller's POWER and
STANDBY keys. These outlets will supply power to any
connected unit whenever this unit is turned on.
The maximum power (total power consumption of components)
that can be connected to the SWITCHED AC OUTLET(S) is
100W.
REAR
(SURROUND)
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR
CENTER
MAIN A OR B: 4 MIN. /SPEAKER
A B: 8 MIN. /SPEAKER
REAR
CENTER
MAIN A OR B: 8 MIN. /SPEAKER
A B:I6 MIN. /SPEAKER
AC OUTLETS
SWITCHED
I00W MAX. TOTAL
CAUTION
SEE INSTRUCTION
MANUAL FOR CORRECT SETTING.
• Unplug the AC power cord from the AC outlet if this unit is
not to be used for a long period of time.
(Europe model)
: 6 MIN. /SPEAKER
: 6 MIN. /SPEAKER
: 8 MIN. /SPEAKER
: 8 MIN. /SPEAKER
PREPARATION
To AC outlet
25