Using The Remote Control - Yamaha RX-V757 Owner's Manual

Yamaha av receiver owner's manual

Hide thumbs Also See for RX-V757:

Service manual (49 pages)

Owner's manual (674 pages)

Product catalog (44 pages)

Table Of Contents

100

101

102

103

104

105

106

107

Table of Contents

C CLEAR

Use to clear functions acquired when using the learn and

rename features, or setting remote control codes (see

page 81).

D LEARN

Use to set up manufacturer codes or program functions

from other remote controls (see pages 76 and 79).

E SLEEP

Sets the sleep timer.

F INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit's input jacks (see page 37).

G MULTI CH IN

Selects MULTI CH INPUT when using an external

decoder (etc.).

H SELECT k/n

Selects another component that you can control

independently of the input component selected with the

input selector buttons.

I AMP

Selects the AMP mode. You must select the AMP mode to

control the main unit.

J VOL +/–

Increases or decreases the volume level.

K MUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level.

L SET MENU, SRCH MODE

Activates the SET MENU function.

M ON SCREEN

Selects the display mode of the on-screen display (OSD)

this unit sends to your video monitor.

N STRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

O NIGHT, ENT.

Turns on or off the night listening modes (see page 35).

Available only when the unit is in the XM Satellite Radio

mode (see page 45).