Page 1
TIER 4 ENGINE ONLY Diesel Particulate Filter Lamp TIER 4 ENGINE ONLY Diesel Exhaust Fluid level Lamp (Not Equipped) VeeCAN 320 Check Engine Lamp ECM CONTROLLED ENGINE ONLY Stop/Check Engine Lamp Consult On Screen Prompt & Engine Manual To Determine Severity Of Fault...
Page 2
TIER 4 ENGINE ONLY Diesel Particulate Filter Lamp TIER 4 ENGINE ONLY Diesel Exhaust Fluid level Lamp (Not Equipped) VeeCAN 320 Check Engine Lamp ECM CONTROLLED ENGINE ONLY Stop/Check Engine Lamp Soot level is above Consult On Screen Prompt & Engine Manual...
Page 3
Regen is required screen cannot be exited until all the alarms have been acknowledged by pressing key 3. Alarm messages are automatically cleared from the list when no longer received by the VEM. VeeCAN 320 VeeCAN 320 Alarm Screen Alarm Screen...
Top Level Menu To acces the Menu screens, press and hold key 5 while in any of the display screens. Pressing key 5 while in any of VeeCAN 320 the menus will return you to the previous menu. PASSCODE: SEE DEALER/MFG 0810...
Page 5
System Menu and Sub-menus VeeCAN 320 VeeCAN 320 VeeCAN 320 Pin Settings are ued to prevent unathorized users to access the VEM menu. The default pin number is “SEE DEALER/MFG”. Once the pin is changed, the new pin becomes the only pin number that can be used.
Page 6
Regen Inhibit, and Auto eliminating the need for the physical switch on the dash. Find a safe To access the T4 Control, go into Configuration VeeCAN 320 location, place in Menu, press Key 1 to scroll to T4 Control, than neutral, apply press Key 4 to acess.
Page 7
Regen Inhibit, and Auto eliminating the need for the physical switch on the dash. To access the T4 Control, go into Configuration VeeCAN 320 Menu, press Key 1 to scroll to T4 Control, than press Key 4 to acess. Key 1: Change the mode to Forced Regen.