Grieve LE7M How To Set

A.

SETTING CURRENT DATE AND TIME:

1. Press and hold
displayed on screen.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press and hold
B.

SETTING WEEKLY ON/OFF PROGRAM FOR OUTPUT 1:

1. Each output can be programmed up to 24 times.
2. Verify Output 1 switch is in "AUTO" position
3. Press and hold
4. Press
5. Press
6. Use the arrow keys to select which days you want Output 1 ON.
a.
b.
7. Press
8. Use the arrow keys to adjust ON time.
a.
b.
9. Press
10. Press
11. Use the arrow keys to adjust OFF time.
a.
b.
12. Press
13. Press and hold
C.

WEEKLY ON/OFF PROGRAM MODIFY FOR OUTPUT 1:

1. Press
2. Press
3. Press
REV 0 –9/29/2008 1:40 PM
M:\Electrical\INSTRUCT\INSTRUMENT\AUTONICS\LE7M TIMER.doc
HOW TO SET LE7M 7-DAY TIMER
and
.
or to adjust year and advance to month by pressing
or to adjust month and press
or to AM or PM and advance to hour by pressing
or to select hour and advance to minute by pressing
or to select minute and press
for 3 seconds to return to RUN mode.
for 3 seconds until "PROG P1" is displayed.
.
for "ON/OFF" control.
Press to advance days.
Press or to select days.
.
Press to advance between hours and minutes.
Press or to change time.
.
to verify days you want to turn Output 1 OFF.
Press to advance between hours and minutes.
Press or to change time.
to complete programming.
for 3 seconds to return to RUN mode.
for 1 second to enter CHECK mode.
for 3 seconds until "Edt" is shown on lower display.
to modify program.
SETTING LE7M 7-DAY TIMER
keys for 3 seconds until "t.AJ" is
.
.
.
.
.
Page 1 of 2