Advertisement
Locking Mechanism
Lock the seat into place by making sure the slide ring snaps firmly onto the brass
push button at the end of the sliding rail (shown below). Release the locking
mechanism by pressing down on the red tab of the locked slide ring.
UNLOCKED
Swivel Seat
Press down on the red tab located under the center of the seat's front edge to
turn the swivel seat, and rotate the seat slightly. Once the seat starts to swivel,
release the red tab. The swivel seat locks every 90 degrees.
Sliding Rails
If the seat is not sliding as smooth as you would like, we recommend spraying
WD40 along the sliding rails.
Rubber Tips
Be sure the rubber tips are turned outward for maximum floor contact
and stability.
Cleaning
Rinse off the seat area with water after each use to prevent dirt, soap scum,
and mineral deposits from forming which could block the push button areas.
If any push button does not completely snap into place,
or if you feel the bench is not secure, please do not use
the bench, and notify your authorized dealer immediately.
Have Questions? Please contact your authorized dealer for assistance.
Thank you for purchasing an Eagle Health Supplies product!
If you would like to register your product for the 1-year warranty,
please fill out the included Warranty Card, and return to Eagle Health Supplies.
LOCKED
For Bariatric Sliding Transfer Benches
55111/ -81/ -91
55662/ -82/ -92 56411/ -81/ -91
55211/ -81/ -91
56111/ -81/ -91 56662/ -82/ -92
55411/ -81/ -91
56211/ -81/ -91
Email: sales@eaglehealth.com
Phone: (714) 532 – 1777
Fax: (714) 532 – 9777
Advertisement
