SAE Standard J1273 (Hose and Hose Assemblies): Publication 99930323 All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. KEEP THIS MANUAL Greenlee / A Textron Company 4455 Boeing Dr.
Do not use near electrical lines. debris or hydraulic oil. Contact with live circuits could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 4
Nearby personnel can be injured by flying or falling debris or by flying parts in the event of a tool malfunction. Failure to observe these precautions may result in injury. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 6
5. Install the lock (4) over the 3/8-24 cutter pivot nut (5). Secure the lock (4) with the #10 x /14 inch socket head cap screw (2) and the #10 lock washer (3). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
• If the known working tool does not operate, the problem is in the power source. Refer to your power source operator’s manual for troubleshooting. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 8
Disassemble tool. Replace worn or damaged damaged. components. Tool leaks hydraulic Tool components loose. Tighten component hardware. fluid. Tool components worn or Disassemble tool. Replace worn or damaged damaged. components. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 9
“Maintenace” section of this manual. Cutter blade dull. Remove blade and sharpen, or install a sharp, new blade. Extension assembly Loose extension connector nut. Tighten extension connector nut. loose. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Inspect all parts as they are disassembled and mating parts in tool that are not removed for signs of damage, wear, cracks, etc. Replace any parts which appear to be damaged. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
O-rings and from trigger side. Remove O-ring (39) from spool seals. (40). Also remove O-ring (41) from valve handle (75). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Thread nut (14) onto upper end (59). may occur. Wood may jam in-between the hook and cutter blade, springing them apart and permanently bending one or the other. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 13
1/4-28 x 7/8 inch hex head cap screws (17) and 1/4-28 hex lock nuts (19) which secure the cutter and mounting assembly to the extension tube (10). Tighten securely. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...
Need help?
Do you have a question about the Greenlee LHFS-210003 and is the answer not in the manual?
Questions and answers