NETGEAR FS205v2 Installation Manual

Installation Guide
5-Port and 8-Port Unmanaged
Fast Ethernet Switch
(FS205v2 and FS208v2)
5-Port and 8-Port Unmanaged
Gigabit Ethernet Switch
(GS205v2 and GS208v2)
Package contents
• Switch model FS205v2, FS208v2, GS205v2,
or GS208v2
• Power adapter (varies by region)
• Installation guide
Note: Ethernet cables are not included.
We recommend that you use Category 5e
(Cat 5e) cable or higher for Gigabit Ethernet
connections.
June 2019
1. Register with the NETGEAR Insight app
1. Search for NETGEAR Insight and download the latest app.
2. Set up a NETGEAR account if you do not have one.
3. Tap the menu in the upper-left corner.
4. Tap REGISTER ANY NETGEAR DEVICE.
5. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device to scan the serial number bar code.
6. Tap GO.
The switch is registered and added to your account. You can now view the
switch in the NETGEAR Insight app.
Note: Because this is an unmanaged switch, you cannot configure or manage it in
NETGEAR Insight.
2. Connect the switch
GS208v2
Access point
Desktop
Sample connections
Desktop
3. Power on the switch
1. Connect the power adapter to the switch and plug it into an electrical outlet.
2. If your switch includes an On/Off button, make sure that the button is in the
On position.
On/Off
button
The LEDs indicate the status.
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
Port • Solid green. The switch detected a link with a powered-on
device on this port.
• Blinking green. The port is sending or receiving traffic.
• Off. The switch does not detect a link on this port.
Internet
Router
ReadyNAS
Gaming console