Ultra Fusion HZ Wine Wall Installation Manual

STEP
06
Plug & Play. Line up the faceplate and backer panel holes then proceed
to secure the faceplate using the provided Ultra PEGs.
STEP
07
Congratulations! You have completed your Fusion Wine Wall Panel
installation. Now it's time to pop a cork, sit back, and admire your handy
work.
FUSION
ULTRA FUSION HZ WINE WALL (3FT) INSTALLATION GUIDE
Important! Before installing Pegs do the following:
1. Check the Package Contents for missing or damaged items
Contact Customer Service at 1-800-611-8644 for questions or concerns
Package Contents
18x pegs 6x Wood Screws 6x Drywall anchors
Recommended Installation Tools
(Not Included)
Power Drill Power Bit Level
Recommended Fastner Applications:
Drywall anchors (included) - Use for installing rails to drywall if studs are not present in
the desired location. Do not use drywall anchors to secure into a wall stud location.
Wood Screws (included) - Use wood screw to secure wall studs or wood panels, do
not use on drywall without securing to a stud. Concrete or Masonry applications not
Concrete, Brick or Stucco (Not Included) - 3/16" x 1-1/4" Masonry Screw
or #8x1-1/4" screw with the proper concrete anchors.
1x Face plate 1x Backer Panel
Pencil Screwdriver Tape Measure
provided.