Table of Contents
Advertisement
Quick Links
Commissioning
• Connect the battery, ensuring the correct polarity is
observed.
• Refit the product to the top cover removed earlier.
Product testing
• The battery test button is located on the white ceiling
cover. Push to test the emergency function of the
product.
• Tests can be carried out as and when required.
• When the LED light next to the test button is
illuminated, this indicates that the unit is charging
Fitting/replacing bulbs
• The LED module in this product is non replaceable
Care and cleaning
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning.
www.saxbylighting.com
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Iss.1 14072015
Saxby Lighting. BH23 3PE
Instruction leaflet
Nova Emergency Exit Light
54544
Advertisement
Table of Contents
Related Manuals for Saxby Lighting Nova
Summary of Contents for Saxby Lighting Nova
- Page 1 Commissioning Instruction leaflet • Connect the battery, ensuring the correct polarity is • Replace fuse or circuit breaker and switch on. Your observed. light is now ready for use. Nova Emergency Exit Light • Refit the product to the top cover removed earlier. 54544 Product testing • The battery test button is located on the white ceiling cover. Push to test the emergency function of the product. • Tests can be carried out as and when required. • When the LED light next to the test button is illuminated, this indicates that the unit is charging Fitting/replacing bulbs • The LED module in this product is non replaceable Care and cleaning We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish. Recycling advice Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before plugs (suitable for masonry only - for other surfaces installation of a new product. Before removing the use appropriate fixings). Fix product to the wall using existing fitting, carefully note the position of each set the supplied screws. Take care to avoid damaging Warning of wires. any concealed wiring and pipes. • Remove the top cover by pushing in the retaining • Feed the incoming supply cable through the cable This light fitting is Class 2 (Double If replacing an existing fitting, make a careful note of clips with a flat head screwdriver (Fig. 1) entry hole. Insulated) and must not be connected to an the connections.
Need help?
Do you have a question about the Nova and is the answer not in the manual?
Questions and answers