Arizona SlimKool SK45AA Owner's Manual

Window cooler

Hide thumbs

Table of Contents

Quick Links

Download this manual

Owner's Manual

DO NOT

Return to store

For help with installation or warranty issues call

623-202-1395 or

www.arizonaaircoolers.com

For parts

custsomerservice@arizonaaircoolers.com

This product may qualify for up to $300 in rebates

Check with your local agency

SlimKool Window Cooler

Model SK45AA

Page | 1

Table of Contents

Need help?

Do you have a question about the SlimKool SK45AA and is the answer not in the manual?

Questions and answers

Summary of Contents for Arizona SlimKool SK45AA

Page 1 Owner’s Manual DO NOT Return to store For help with installation or warranty issues call 623-202-1395 or www.arizonaaircoolers.com For parts custsomerservice@arizonaaircoolers.com This product may qualify for up to $300 in rebates Check with your local agency SlimKool Window Cooler Model SK45AA Page | 1...
Page 2 Introduction Introduction GENERAL INFORMATION Thank you for purchasing a quality Bonaire Evaporative Cooler. We care about your safety and would ask you to spend a few minutes reading these simple instructions before installing or operating this product. Safety! Read carefully all of these instructions prior to installing and operating the unit.
Page 3 Operation Instructions Unit Operation It is essential for successful operation of the evaporative cooler that there be sufficient free air openings in the room to be cooled – approximately 0.5m² (5.4² feet). Open doors and windows will usually provide this as per the diagrams below.
Page 4 Operation Instructions Cooler Operation Before Starting  Always ensure that there is another open window or door through which the air can exhaust to other parts of the house. Refer page 5 for correct operation and ventilation.   Ensure that the filters are kept clean. ...
Page 5 BONAIRE WINDOW COOLER Installation Installation Installation Requirements Tools Materials Required (Not supplied)   Drill (Power or Cordless) Silicone for sealing Window Infill panel   Adjustable Wrench. Length of 6mm (¼") copper or plastic  tubing Phillips Head Screw Driver ...
Page 6 Installation External Fixing of the Unit  Ensure that the location chosen to mount the cooler is strong enough to support the operating weight of the unit. The unit’s nominal operating weight is 42 kg (93 lbs).  Ensure that the window opening or wall cut out is large enough for the neck of the cooler (nominally 560mm (20”) high by (20”) wide).