Display Panel - Yamaha R-302 Owner's Manual

B
Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
C
BALANCE control
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.

DISPLAY PANEL

PRESET
MEMORY
4
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected program source.
2
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
3
Signal-level meter
Indicates the signal level of the received station.
If multipath interfernce is detected, the indication decreases.
4
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and one of the PRESET STATIONS buttons.
1
FM
TAPE MONITOR
5
D
A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
E
PRESET STATIONS buttons
Used to enter as many as 40 station frequencies into the
memory.
F
Continuously variable LOUDNESS control
Used to compensate for the human ears' loss of sensitivity to
high and low-frequency ranges at low volume.
G
VOLUME control
Used to raise or lower the volume level.
2
STEREO
MHz
0 20
AUTO TUNING
6
5
TAPE MONITOR indicator
Lights up when the tape deck is selected as the input source
by pressing the TAPE MONITOR button.
6
AUTO TUNING indicator
This indicator lights up when this unit is in the automatic tuning
mode.
7
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
3
40 60 l00
SLEEP
7
7