Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Cooper Security KEY-EP
- Page 1 KEY-EP Installation Guide Fig. 1. Fig. 3. Fig. 2. Issue 1...
- Page 2 KEY-EP Introduction The KEY-EP is an external proximity tag reader designed to work with the KEY- KPZ01 and KEY-KP01 keypads. Please note that control units with software versions lower than 4.03 cannot use the external prox reader. Figure 1 shows the outside details of the unit: 1.
- Page 3 External Prox Reader LED The KEY-EP has a built in LED that can glow for 10s to indicate that the system has set. This LED mimics the action of the LED under the “A” on the keypad as...
- Page 4 On leaving the premises the user then presents their prox tag to the KEY-EP and the system sets. To enter the system the user presents their prox tag to the KEY-EP and the system unsets immediately. © Cooper Security Ltd. 2013...
Need help?
Do you have a question about the KEY-EP and is the answer not in the manual?
Questions and answers