Control Panel - Carbest 71357 Manual

ENGLISH
PARTS
CASE
CONTROL
PANEL
MOVEMENT AND INSTALLATION
THE COMPRESSOR ON THE BACK SIDE IS REMOVEABLE.
THE CABLE LENGHT BETWEEN UNIT AND COMPRESSOR IS 2.0m.
- When moving the freezer, the angel between the cabinet and the ground should not be less than 45°C
in order to protect the compressor and refrigerating system.
- Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and corrosive gases.
- The normal operation of the freezer depends on the heat radiation of the condenser.
For the initial use, the packing foam must be taken off and at least 150 mm space must be left around the freezer.
8
DOOR
DOOR LOCK