Advertisement
Quick Links
Advertisement
Related Manuals for Pulse Tropicana ShowerSpa 1039W-BN
Summary of Contents for Pulse Tropicana ShowerSpa 1039W-BN
- Page 1 Tropicana ShowerSpa Model #1039W-BN PW-91039-5625SFBSS & PW-91039-5618SFBSS Owner's Manual...
- Page 2 Tropicana Model #1039W-BN/ PW-91039-5625SFBSS/PW-91039-5618SFBSS Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
-
Page 3: Product Dimensions
Product Dimensions 5.5 in. - 139.7 mm 2 in. - 50.8 mm 9.5 in. - 241.3 mm Finished Wall Line 23.5 in. - 596.9 mm Measured To Bottom Of Bracket Measured To Bottom Of Bracket 11 in. - 279.4 mm 6 in. - Page 4 Parts Legend Flow Restrictor Placement: •2.5/1.8 gpm restrictor inside the showerhead •2.5/1.8 gpm restrictor in the diverter outlet to the body jet •2.5/1.8 gpm restrictor with check valve built-in in the handshower 1. ShowerSpa 2. Shower Arm 3. Shower Arm Base 4.
- Page 5 Assembly After unpacking your ShowerSpa, some assembly is required prior to installation. Shower Arm Assembly Attach shower arm to the shower arm base and secure. Handshower Holder Assembly NOTE— The handshower holder is directional and must be installed so the set screw is facing down in order for the tapered end of the hose to fit properly.
- Page 6 Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
- Page 7 Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
- Page 8 For other purchasers, repaired or replacement Products will be covered for the balance of the original warranty period. PULSE ShowerSpas, Inc. | 297 Anna Street | Watsonville, CA 95076 | 831.724.7300 www.PulseShowerSpas.com PULSE20-REV. C...