Advertisement
Thank you for purchasing this Venetian blind.
INTRODUCTION
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
It is recommended that this blind should only be installed by persons
competent in DIY. At John Lewis, we are committed to making great products
possible. From our in-house Design Team, to our Buyers, we work together to
bring great design to life. Our Product Technologists work collaboratively with
our Buyers and suppliers to ensure the legality, safety and quality of the product
we sell. We are all committed to designing and developing products to the
highest industry standards.
We hope you are happy with your product and welcome any feedback or
comments you may have.
VIDEO
Scan the QR code to link to our online videos that guide you
INSTRUCTIONS
in getting a perfect fit for a Roller blind. Alternatively follow the
link johnlewis.com/blindassembly
TOOLS REQUIRED
PEOPLE TO
One person
ASSEMBLE
TIME TO
1 Hour
ASSEMBLE
01
WARNINGS
Small parts – choking hazard.
!
Keep small parts out of reach of children
!
Ensure the product is fully assembled as illustrated before use.
!
Young children can be strangled by loops in pull cords, chains, tapes
!
and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of reach of children.
!
Cords may become wrapped around a child' s neck.
!
Move beds, cots and furniture away from window covering cords.
!
Do not tie cords together. Make sure cords to not twist and create a loop.
!
The safety clips should be positioned high enough to be out of reach
!
of small children yet accessible to adults.
All safety clips for blinds need to be fixed to a solid surface using a
!
screw and fixing suitable for the wall or surface material – see guide to
wall mounting and fixings on the last page. These items should not be
glued or stuck in place.
The head rail should not be installed less than 1.5m from the floor.
!
DO'S
Please read all safety warnings and installation information fully before installation.
This product should be fitted in accordance with the manufacturers fitting
instructions.
Check the pack to make sure you have all the parts listed.
Take care when drilling on glazed tile surfaces in case the drill slips.
Check that all screw and bolt assembly fittings are tightened and inspect on a
regular basis.
Use the safety device provided.
Please read our guide on wall mounting and fixing on the inside back cover.
Do not over tighten screws or bolts.
DONT'S
Do not use power tools to construct as over tightening and failure may occur.
02
Advertisement
