Controls; Status Leds - Boston Acoustics Boston GT GT-5750 Owner's Manual

Controls

GT-5750
1 2
Front Channel Input Sensitivity (250mv to 8.0v - continuously variable)
Front Channel Highpass Frequency Adjustment (20Hz to 350Hz - variable)
Front Channel Highpass Crossover OFF/ON Switch
Front Channel Highpass Crossover Q-Tune
Rear Signal Routing Switch (Sends Front RCA Signal to Rear Channels)
Rear Channel Input Sensitivity (250mv to 8.0v - continuously variable)
Rear Channel Highpass Frequency Adjustment (20Hz to 350Hz - variable)
Rear Channel Highpass Crossover OFF/ON Switch
Rear Channel Highpass Crossover Q-Tune
Subwoofer Signal Routing Switch (Sends RCA Signal to Subwoofer)
Rear Channel Remote Gain OFF / ON Switch (ON when using GT-RSL)
Subwoofer Channel Input Sensitivity (250mv to 8.0v - continuously variable)
13 14 15
Subwoofer Channel Lowpass Frequency Adjustment (20Hz to 350Hz - variable)
13 14 15
Subwoofer Channel Lowpass Crossover OFF/ON Switch (OFF/12dB/24dB)
13 14 15
Fuse (replace with 100amp mini ANL only)
13 14 15
13 14 15

Status LEDs

The Boston Logo will illuminate "Red" under normal operating conditions.
The Orange LED (not visible unless lit) will illuminate during start-up and under fault conditions. If this
is illuminated after start-up, please refer to troubleshooting on page 12.
5
3 4 6 7 8 9 10
Red
Orange
11 12
13 14
™ Adj. (0.707 to 1.6 - variable)
™ Adj. (0.707 to 1.6 - variable)
15
5