Handle Assembly Instruction - Presto Lifts HPT 50 Series Operating Instructions Manual

1. Make sure the symbol
on the handle and pump
are the same
3. Put handle on pump body, then
take out the chain from handle. Hit in
shaft (1-12)
6. First, put spring pin (1-
21) in pump. Then, put in
screw (1-21)
Page 6 —
PRESTO OWNER'S MANUAL: HPT 50 & 55 SERIES

Handle Assembly Instruction

4. Insert chain through
shaft (1-12)
7. Take out steel axle from
pump
2. Take out screw (1-21)
Hit out shaft (1012)
5. Connect chain with acti-
vator (1-38)
8. Depress pump handle about 10 times
while keeping fingertip on "Lower Position" to
release air from pump