Summary of Contents for AutoTest Pedal Effort
- Page 1 User Manual Version 2.0 Test AUTO ™ Pedal Effort Sensor I n V e h i c l e P e d a l E f f o r t S e n s o r...
- Page 2 DECLARATION OF CONFORMITY We, Auto Test Products Pty Ltd. declare under our sole responsibility that the product Pedal Effort Sensor is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity is available from http://www.autotest.net.au ©...
- Page 3 Pedal Effort Sensor User Manual v2.01.docx Page 3 of 17...
-
Page 4: Table Of Contents
AUTHORISED SERVICE AGENTS: OPERATION Set-Up Bluetooth Pairing Running the Test Reviewing a Test Printing a test SPECIFICATIONS Hardware Specifications Features TROUBLESHOOTING CALIBRATION PROCEDURE Returning the Sensor for Calibration 8.1.1 Packaging 8.1.2 Shipping Pedal Effort Sensor User Manual v2.01.docx Page 4 of 17... -
Page 5: Autotest™ Pedal Effort Sensor
Congratulations on your choice of an AUTOTEST™ Pedal Effort Sensor. Please take the time to read this User’s Manual before using the Pedal Effort Sensor in the field. Incorrect or inappropriate use of this instrument may void the warranty. Retain the packing materials for future shipping and transport of the unit as it must be calibrated periodically. -
Page 6: For Your Safety
Your device is not water-resistant. Keep it dry. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products. Pedal Effort Sensor User Manual v2.01.docx Page 6 of 17... -
Page 7: Warranty
This warranty applies only to products and components supplied by AUTOTEST Products which can be identified by the trade name or logo affixed to them or by other documents. AUTOTEST Products does not warrant any products not supplied by AUTOTEST Products. -
Page 8: Authorised Service Agents
PH: (+017) 5221 9150 The full list of Authorised Service Centres can be found on our website: http://www.autotest.net.au/distributors/ Alternatively, you can contact the AutoTest Service Department by Phone: (+61 3) 8840 3016 Pedal Effort Sensor User Manual v2.01.docx Page 8 of 17... -
Page 9: Operation
When the battery is low the ON light will start blinking red (alternating green). At this time the unit will still be functional, but it is recommended that the battery is changed especially when the ON light is blinking quickly. Pedal Effort Sensor User Manual v2.01.docx Page 9 of 17... -
Page 10: Bluetooth Pairing
Bluetooth Pairing Upon receiving the Pedal effort sensor or Bluetooth printer, the unit will need to be paired with the Workshop pro. Pairing occurs in the Bluetooth menu, under settings menu. The Bluetooth menu will display a list of currently paired devices. At the bottom of the screen is a “Scan for devices”... - Page 11 Any movement may cause incorrect readings and result in failure of the test. Press “Start” on the bottom right of the screen. Figure 4 Pedal Effort Sensor User Manual v2.01.docx Page 11 of 17...
- Page 12 ‘Decelerate Vehicle’ brakes until the vehicle comes to a complete stop Vehicle comes to a Test Report is Pull over and review complete stop generated and test displayed on App screen Pedal Effort Sensor User Manual v2.01.docx Page 12 of 17...
-
Page 13: Reviewing A Test
Make sure the printer you intend to print from is turned on and select it Figure 7 from the choose printer dialog. It will begin to print out shortly. Figure 8 Pedal Effort Sensor User Manual v2.01.docx Page 13 of 17... -
Page 14: Specifications
12 months warranty • Internet support hotline for diagnostics and calibration • Comprehensive after-sales service and assistance *battery capacity based on supplied batteries. Capacity could change if different batteries are used. Pedal Effort Sensor User Manual v2.01.docx Page 14 of 17... -
Page 15: Troubleshooting
You can manually zero the pedal with the button on the front panel. Please contact your local Authorised Service Agent (Page 8) for further assistance. Pedal Effort Sensor User Manual v2.01.docx Page 15 of 17... -
Page 16: Calibration Procedure
However, should expedient delivery be required ensure you contact your freight carriers for confirmation. Ship to: Ship to: The Service Department, AutoTest Products Pty Ltd, 61-63 parsons St, Kensington, Victoria 3031 Australia. Phone: +61 3 8840 3016; or to your nearest service distributor. - Page 17 NOTES: Pedal Effort Sensor User Manual v2.01.docx Page 17 of 17...
Need help?
Do you have a question about the Pedal Effort and is the answer not in the manual?
Questions and answers