Summary of Contents for ICB Cook Matic
- Page 1 Via commercio, 86 25010 Ponte San Marco di Calcinato (Bs) INSTRUCTION BOOK Revisione 0 - novembre 2007...
-
Page 2: Table Of Contents
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.2 di 25 Summary INTRODUZIONE……………………………………………………………………………………………...3 GENERAL WARNINGS………………..…………………………………………………………………….4 2.1 TYPOGRAPHICAL CONVENTIONS………………………………………………………………….4 2.2 DEFINITIONS ..........................5 2.3 DATA OF THE PRODUCER AND LOCATION FOR THE CE LABEL……………………………..5 2.4 OBLIGATIONS AND DUTIES…………………………………………………………………………..7 DESCRIPTION AND USE FOR THE MACHINE………………………………………….......8... -
Page 3: Introduzione
This instruction book addresses to the worker that will conduce the destined operating equipment to the activity of production of tartlets in various shapes with the COOK MATIC. Particular attention comes to the aspect emergency of the workers assigned to the... -
Page 4: General Warnings
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.4 di 25 GENERAL WARNINGS THYPOGRAPHICAL CONVENCTION In this instruction book we will use the following typographical conventions: SYMBOL MEANING PARTICULAR PROCEDURE WHOSE LACKED OBSERVANCE CAN BRING DAMAGES TO THE... -
Page 5: Definitions
• Declaration of conformity to the senses of attached the II A; this document is attached to the present manual; • CE Label; • Instruction book. An appropriate metallic label applied to the COOK MATIC in indelible way the following information: • Social denomination and address; • CE Label;... - Page 6 ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.6 di 25 EXAMPLE OF THE CE LABEL: Attrezzatura COOK MATIC Assemblatore ICB Tecnologie s.r.l. Via commercio, 86 25010 Ponte San Marco di Calcinato (Bs) - Italia Anno 2007 N°...
-
Page 7: Obligations And Duties
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.7 di 25 OBLIGATION AND DUTIES Duties of the employer The employer is responsible of the spreading of the present document to all the staff who will use machine COOK MATIC. -
Page 8: Description And Use For The Machine
Cook Matic is very easy to use. Merely set the required temperature, which is then displayed, and the cooking time. Place some dough in each cavity, close the two halves and press time. -
Page 9: Technical Features
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.9 di 25 DATI TECNICI The conductor must supply the electric power for the machine, a protection differentiates them from 30 A. GENERAL CARACTERISTICS Tension Powert 3200 Dimension... -
Page 10: Safety
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.10 di 25 SAFETY GENERAL INFORMATIONS The equipment can be lead from staff not specialized, except for the operations of regulation, putting to point and ordinary maintenance, for which it is demanded personal specialized that know the electrical and mechanical problems of the machine. -
Page 11: Users' Equipment
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.11 di 25 All the operation of regulation or set up, in reduced security status, must be done by one single person and during these operations is strictly forbidden the acces to the machine to not authorized persons. -
Page 12: Uses Previews, Not Previews, Wrong Uses
USES PREVIEWS, NOT PREVIEWS, WRONG USES ENERAL NORMS COOK MATIC is destined only to do the workings indicated to the precedence point 3.1. COOK MATIC is an equipment specific, planned and constructed exclusively in order to do specific workings indicated, any use, not express previewed in the manual present is from thinking improper. -
Page 13: Risk - Protection - Warnings And Cautions
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.13 di 25 RISK - PROTECTION - WARNINGS AND CAUTIONS ENERAL ECURITY The equipment has been planned sure, and equipped of protective devices in order to guarantee the safety of the persons exposed to the mechanical risks. The access to the dangerous zone is protect. -
Page 14: Activities Carry Out From The Workers
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.14 di 25 2.10 ACTIVITY DONE BY THE OPERATOR Operation and position Danger and possibile risk Possibile damage of the worker Activity required to the worker Normal use of the... - Page 15 ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.15 di 25 SAFETY LABELS For giving to evidence of the residual risks presents, on the equipment the company ICB tecnologie srl has placed the following labels: Tension risk Placed on the top of the electrical system Do not remouve safety guard To apply on the equipments’...
-
Page 16: Transport And Installation
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.16 di 25 TRANSPORT AND INSTALLATION The machine has been assembled in the constructor warehouse and packed for the transport. It reaches the custromer ready for the installation. - Page 17 ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.17 di 25 Place the machine so as to allow the access to the hopper and the nozzles in order to allow to the operator not to assume anti ergonomia positions.
- Page 18 ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.18 di 25 THE ELECTRICITY MUST TO BE ALWAYS SWITCH OFF WHEN THE OPERATOR IS DOING MAINTINANCE ON MOVING THE MACHINE IT IS IMPORTANT TO PUT THIS LABEL ON THE ELECTRICITY INTERRUPTOR WHEN THE OPERATOR IS DOING MAINTENANCE.
-
Page 19: Use Of The Machine
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.19 di 25 WAY OF USE OF THE MACHINE 2.14 USE AND REGULATION OF THE MACHINE Revisione 0 - novembre 2007... -
Page 20: Equipment's Switch On
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.20 di 25 REGULATION OF TEMPERATURE The temperature is automatically memorised at 180° C. To set the desired temperature: Push the TEMP button. Push the “+” or “–“ button till you have reached the desired temperature. -
Page 21: Functional Stops And Re-Starts
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.21 di 25 2.17 FUNCTIONAL STOPS AND RE-STARTS The cycle of the machines can stops for one of the following reason: CAUSE STOPS RE-START • Repeat the start operation eccept the swich on of... -
Page 22: Warnings
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.22 di 25 7 MAINTENANCE AND CLEANING WARNINGS ALL THE MAINTENANCE OPERATIONS, REPAIR, CLEANSING, MUST BE SWITCH OFF AND UNPLUGGED Before undertaking any action of maintenance, we advise to careful reading of the present. -
Page 23: Maintenance Controls
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.23 di 25 2.18 MAINTENANCE CONTROLS SAFETY TO EVERY TURN to control, equipment in motion, the perfect efficiency of the control panels, the operation of the spies and signalling lamps, the functionality of the push-buttons of emergency and the levers of commando. -
Page 24: Cleaning
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.24 di 25 7.2.2 CLEANING Before to clean the machine do the following operation: Switch off the machine Unplugged the machine 220 / 240 V Before use to clean up and rinse the hopper and small beaks with lukewarm water, detergent for pottery and a soft sponge. -
Page 25: Attached
ICB Tecnologie s.r.l. – Ponte S. Marco di Calcinato (Bs) Cook Matic Pag.25 di 25 ATTACHED With this manual you will find also the following documentation: Electric diagram of the machine. Revisione 0 - novembre 2007...