Advertisement
4. Use of the payment terminal
Turning on and off
When the power supply is connected, the payment terminal will start automatically. The payment
terminal cannot be turned off when it is connected to the power supply. Remove the power supply
from the terminal to turn it off.
Doing a transaction
Enter the desired amount. Press the green button to start the payment. If an incorrect amount has
been entered, this can be corrected by pressing the yellow button. You can stop the transaction by
pressing the red button.
Changing the paper roll
When the paper roll has run out, it can easily be replaced.
1.
Above the screen is the compartment where the paper roll is located. Open it by pulling
the cover towards you. See figure 1.
2.
Remove the empty roll and insert a new paper roll. Place the paper roll with the beginning of
the roll facing up as shown in the image.
3.
Grasp some of the paper and close the cover again.
4.
In the lower left corner is the 'F' button that allows the terminal to print out a piece of
paper. Press and hold this button to test whether the machine is unrolling the paper roll
correctly.
5. Payment methods
You received a sticker with payment logo's together with your payment terminal.
Cut out the logo's of the payment methods you offer to your customers. Please place this
sticker in a place that is clearly visible to your customers.
For more questions go to help.emspay.eu or call: 0800-3678324
Figure 1.
Figure 2.
Any transaction - any way EMSpay.nl
Advertisement
