Orbis Thermo X User Manual page 73

DISPLAY
Day
of the week
Time
Daily
temperature
profi le
System on
– WINTER
-HEATING MODE
INITIAL STARTUP – TOTAL RESET
This procedure enables correct operation of the Thermo X on fi rst startup, or resets
factory settings (Default settings).
Revert to factory settings – TOTAL RESET
• Place 2 alkaline batteries 1.5V – AA size, with correct polarity
• Press : all the segments will appear on the display
• Press within 3 secs: the reading "dEF" will appear
After a few seconds the reading "12:00" will fl ash on the display.
• Press : the minutes will fl ash
• Press : all the segments will be continuously lit, the hour, minutes and the
temperature measured will appear as well as a set of small squares indicating daily
programming
Thermo X will operate in automatic mode (cfr. page 73).
• Set the time (cfr. page 72)
Default settings are:
Operation
Mode
Hourly schedule
Temperature T0
Temperature T1
Temperature T2
Manual
operation
System on
– SUMMER
-AIR-CONDITIONING
WINTER-HEATING
AUTOMATIC
MON-FRI PRG1; SAT-SUN PRG2
5.0°C
15.0°C
18.0°C
- 71 -
User Manual - Thermo X
External
temperature
Internal
temperature
Timer
on