Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Nibe Contura Connect
Summary of Contents for Nibe Contura Connect
- Page 1 Contura Connect App: Fire Wi-Fi Easy contura.eu...
-
Page 3: Table Of Contents
A warm welcome to Contura! Welcome to the Contura family! We hope your WiFi device will bring you hours of pleasure. Please read through the entire manual to ensure the device is installed correctly. Keep this manual in a place where it can be accessed quickly. -
Page 4: Introduction
1 Introduction Important information Installation should be performed by a service technician since it involves work on the stove. CE declaration see manual for the stove Contura 101. Recycling Information about correct recycling of the product in accordance with the provisions of Directive 2012/19/EU. When the device has reached the end of its useful life, it must not be disposed of as normal household waste. -
Page 5: Connection To Stove
2 Connection to stove WiFi device content 1 WiFi device holder 2 WiFi device 3 Communication cable 4 Power adapter The code found on the back of the WiFi device is used later when connecting to the app. MAC address XX:XX:XX:XX:XX:XX REG.COD XXXXXX... - Page 6 1. Connect the communication cable to the control board. Note that the device connectors have a unique shape. 2. Pull the communication cable through the square hole. Connect the communication cable to the WiFi device. When the communication cable is connected to the control module, the WiFi device is powered by the stove while it is on.
-
Page 8: Connect Wifi Device To The Internet
3 Connection of WiFi device to the Internet 1. Communication cable connection 2. Power supply connection 3. POWER Green LED: Shows that the WiFi device is connected to a power supply. 4. SERVER REMOTO Orange LED: Shows that it is connected to a WiFi network. 5. - Page 9 Open it with the PC/tablet/smartphone's Internet: http://192.168.1.1 Select WiFi Configuration in the field on the left. Select an available wireless network under “Available networks”. Enter the password for the WiFi network and then click on “Connect”. The orange LED (ACCESS POINT) turns off and another orange LED (INTERNET) blinks for a few seconds before turning solid.
-
Page 10: App And Configuration
4 APP and configuration The App ”Fire Wi-Fi Easy” is available for Android and IOS phones. Download and install the ”Fire Wi-Fi Easy” app. Select a language for the app. More info about the app see under ”Help” and each content. Change language... - Page 11 Register your email address with a password. An email message will be sent to your address with the link to confirm your subscription then login with your subscription.
- Page 12 Add data as below and then press ”Add the stove”. To manage the stove choose the stove. You also find guidance and explanation under ”Help” see page 29. The name you choose for your stove...
- Page 13 Pages on the app Turn the stove off/on Set power Set power Info status stove Set speed fan Set indoor temperature Chronothermostat You will find guidance and explanation for each content under “Help”...
-
Page 14: Troubleshooting
5 Troubleshooting Problem Corrective action • Check that the stove is on. • Power adapter connected (not needed if the WiFi The POWER LED is not lit. device is connected to the stove). • Communication cable connected. The ACCESS POINT LED does not light up at Press Reset and repeat the installation procedure. - Page 16 NIBE AB · Box 134 · 285 23 Markaryd · Sweden contura.eu Contura reserves the right to change dimensions and 811351 IAV Contura Connect-4 procedures specified in these instructions without prior 2020-10-27 notice. Access the latest version at www.contura.eu...
Need help?
Do you have a question about the Contura Connect and is the answer not in the manual?
Questions and answers