Parallel Hookup - Yamaha CP2000 Owner's Manual

Parallel Hookup

In PARALLEL mode, the L and R channels operate independently but the input signal
for both channels is sourced from the Channel L inputs. This mode is typically used
with a mono source and allows independent volume control of two sets of speakers.
The following hookup example shows how the CP2000 can be used in PARALLEL
mode.
STEREO
BRIDGE
PARALLEL
INPUT
CHANNEL R CHANNEL L
STEREO
BRIDGE
NEUTRIK
PARALLEL
2 1 2 1
OFF ON
3 3
YAMAHA
SPEAKER PROCESSING
MONO OUT
Mixer
PARALLEL Notes:
• The input source must be connected to the Channel L inputs.
• The Channel R inputs are inactive.
• The Channel L and Channel R volume levels can be set independently.
• Speakers can be connected to the 1/4" phone jacks and 5-way binding posts.
(BRIDGE)
Total impedance:
2 min (1000 W)
4 (650 W)
8 (450 W)
Parallel Hookup
2 1 1
(–) BRIDGE (+)
CHANNEL R CHANNEL L
SPEAKERS
CP2000—Owner's Manual
5
2
Total impedance:
2 min (1000 W)
4 (650 W)
8 (450 W)