Technical Data - Overkiz HATTARA DIN RAIL MR-ENO Manual

Hattara DIN Rail
®
Introduction
CONFIGURATION
- Refer to the user guide for the smartphone app for all information on pairing a product.
- Also refer to the user guide of the product to be piloted to configure it
INTERFACE
The indicator light provides information concerning the operating status of the product.
In normal operating mode
Flashing green : The module is starting up (may take several seconds).
Fixed green : The module has started.
Flashing orange : he module is in radio communication.
Off : The product is not supplied with power. Check the wiring.
If the wiring is correct but the product is still off, please contact the customer service.

TECHNICAL DATA

- Consumption in normal operating mode: 5V
- Impact protection rating: IK07.
- Operating temperature -10°C to 40°C.
- Maximum operating altitude: < 2000m.
- Pollution category: Class 2.
- Operating humidity: between 5% and 90%.
- Dimensions (l x w x h) 27x90x58mm.
- Plastic housing: PC V0.
- Frequency used and maximum power used: 868.0 MHz - 868.6 MHz/erp < 25 mW.
RECYCLING AND DECLARATION OF CONFORMITY
Do not dispose of this product with the household waste. Please take it to a collection point or
an approved centre to ensure it is recycled correctly. Hereby, Overkiz declares that the radio
equipment type 2 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity
http://legal.overkiz.com/DoC/DIN-RAIL-ENO-DoC.pdf.
SYMBOLS AND DESCRIPTION
CE label
Consult the CE guide
Disposal of waste electrical and electronic equipment (WEEE). This symbol indicates that
used batteries and electronic equipment must not be disposed of with the household waste
but collected separately.
Direct current
MR-ENO module
500mA (0.5A)
is available at the followinginternet
EN
Allée de la Mandallaz - Immeuble Variation A
74370 METZ-TESSY - FRANCE
Illustration
BOX CONTENTS
1 x MR-ENO
module
1x interconnection cable
PRODUCT DESCRIPTION
address:
DIN rail
mounting
fastening clips
1 x DIN Rail 1x installation guide
mounting
1 x aerial
Bridging connectors
for additional modules
Aerial connector
Location of the
marking label
Status indicator
Connector
for the
CU module
5