Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the light will be
flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by long-pressing the On/Off button for 5 seconds until the indicator light
begins flashing.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Other > Mosquito Trap).
7.
Ensure that the device is in pairing mode, with the light rapidly flashing, and tap
"Confirm light is rapidly flashing".
Advertisement
