Yamaha GX-3 Owner's Manual page 39

HOW TO USE THE BUILT-IN TIMER
DISPLAY
5
TUNER
POWER CD
5
1 2
1 2
4 5
4 5
7 8
7 8
0
CD/TUNER
0
PLAY/PAUSE
STOP TIME
PROG TAPE
MUSIC
LOCATION
USER
TIMER
TUNER
2
TIMER REC
1
TUNER TAPE
3
FM/AM
3
6
6
9
DISPLAY
DISPLAY
9
+10 SLEEP
AUX
REPEAT
EDIT RANDOM
Note
If a timer play setting is made and the power is not turned off,
the source set for the timer play will begin playing when the
time comes in place of the source played at that time.
To cancel the timer play setting
While the power is on, press the TIMER button so that
"TIMER" goes out from the display.
* If it is not canceled, the system will be turned on at the
same time every day, so it can be used as an alarm.
However, if you will be out at that time, cancel the timer
play setting.
* If the AC supply lead is unplugged or there is a power
failure, the time set on the timer will be cleared.
Timer recording
(To record a tuner program)
1
Load a blank tape into the DECK B cassette
compartment.
2
If desired, change the setting of the reverse mode and
the Dolby NR.
3
Press the TUNER input selector button and tune to the
station of which program you want to record.
4
Follow step 2 of the "Timer play" on page 32.
,
* In step press the TUNER input selector button.
,
* In step set the time when you want to begin the
timer recording.
,
* In step set the time when you want to finish the
timer recording.
Next, before the display is changed from time setting
mode to another mode, press the TIMER button so that
"TIMER" appears on the display, and then press the
TIMER REC button so that the indicator over the button
lights up.
(Note: The TIMER REC button will function only when
the display shows the time setting mode.)
5
If you will not use this unit until the timer recording
begins, turn the power off by pressing the POWER
switch.
To confirm the timer time setting
Press the DISPLAY button.
To cancel the setting of timer recording
Press the TIMER button.
("TIMER" will disappear from the display.)
* If the AC supply lead is unplugged or there is a power
failure, the time set on the timer will be cleared.
Note
When the timer recording is finished, the timer setting is
automatically canceled to avoid repeating timer recording of
the same setting.
E-33