1. Manuals
  2. Brands
  3. SMART Embedded Computing Manuals
  4. Network Card
  5. Centellis 2x00 User Card-10GE
  6. Installation and use manual

SMART Embedded Computing Centellis 2x00 User Card-10GE Installation And Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Centellis 2x00 User Card-10GE
Installation and Use
P/N: 6806800H33E
January 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Centellis 2x00 User Card-10GE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SMART Embedded Computing Centellis 2x00 User Card-10GE

  • Page 1 Centellis 2x00 User Card-10GE Installation and Use P/N: 6806800H33E January 2020...
  • Page 2 Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only. Disclaimer* SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials.

  • Page 3: Table Of Contents

    Centellis 2x00 User Card-10GE Hardware ........
  • Page 4 Related Documentation ............47 A.1 SMART Embedded Computing Documentation ....... . . 47 A.2 Related Specifications .
  • Page 5 Face Plate ............37 Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 6 List of Figures Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 7 Face Plate LEDs ........... . . 37 Table 3-2 Centellis 2x00 User Card-10GE Specific Sensors ......38 Table 4-1 Environmental Requirements .
  • Page 8 List of Tables Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 9: About This Manual

    German translation of the safety notes. Chapter 1, Introduction on page 23 gives an overview of the product. Chapter 2, Centellis 2x00 User Card-10GE Hardware on page 29 provides detailed hardware information of the product. Chapter 3, Controls, Indicators and Connectors on page 37 describes external interfaces of the product, this includes connectors and LEDs.
  • Page 10 Media Access Control Management Information Base Mezzanine Management Controller Managed Object NEBS Network Equipment Building System Object Identifier Out-of-Band Out-Of-Service Printed Circuit Board Power Entry Module PICMG PCI Industrial Computer Manufacturers Group Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 11 Notation for software buttons to click on the screen and parameter [text] description Repeated item for example node 1, node 2, ..., node 12 Omission of information from example/command that is not necessary at the time Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 12 Indicates an electrical situation that could result in moderate injury or death Indicates that when working in an ESD environment care should be taken to use proper ESD practices No danger encountered, pay attention to important information Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 13 Updated SMART EC Documentation table. 6806800H33D May 2016 Removed Declaration of Conformity. 6806800H33C May 2014 Rebranded to Artesyn. Standard Compliances on page 27 6806800H33B December 2012 Updated 6806800H33A September 2010 First edition Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 14 About this Manual About this Manual Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 15: Safety Notes

    Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment. SMART Embedded Computing intends to provide all necessary information to install and handle the product in this manual. Because of the complexity of this product and its various uses, we do not guarantee that the given information is complete.
  • Page 16 Damage of the Product and Additional Devices and Modules Incorrect installation or removal of additional devices or modules may damage the product or the additional devices or modules. Before installing or removing additional devices or modules, read the respective documentation. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 17 Ensure that any individual output current of any source stays within its acceptable limits (see the technical specification of the respective source). Environment Always dispose of used products according to your country’s legislation and manufacturer’s instructions. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 18 Safety Notes Safety Notes Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 19: Sicherheitshinweise

    Verletzungen oder Schäden am Produkt zur Folge haben. SMART Embedded Computing ist darauf bedacht, alle notwendigen Informationen zum Einbau und zum Umgang mit dem Produkt in diesem Handbuch bereit zu stellen. Da es sich jedoch um ein komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, können wir die Vollständigkeit der im Handbuch enthaltenen Informationen nicht...
  • Page 20 Bevor Sie das Produkt oder elektronische Komponenten berühren, vergewissern Sie sich, dass Sie in einem ESD-geschützten Bereich arbeiten. Fehlfunktion des Produktes Fehlerhafter Ein- und Ausbau des Produktes kann zur Beschädigung des Produktes führen. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 21 Spannung, auch wenn sie vom Versorgungskreislauf getrennt ist (und umgekehrt). Prüfen Sie deshalb immer, ob die Leitung spannungsfrei ist, bevor Sie Ihre Arbeit fortsetzen, um Schäden oder Verletzungen zu vermeiden. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 22 Stromaufnahme jedes Verbrauchers innerhalb der zulässigen Grenzwerte liegt (siehe die technischen Daten des entsprechenden Verbrauchers). Umweltschutz Entsorgen Sie alte Batterien und/oder Produkte stets gemäß der in Ihrem Land gültigen Gesetzgebung und den Empfehlungen des Herstellers. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 23: Introduction

    IPMBs and accesses one Fabric Interface (FI) of the corresponding AdvancedTCA blade. The Centellis 2x00 User Card-10GE module is intended to be used in a Centellis 2x00 chassis. The module when installed in the dedicated User Card slot provides uplink connectivity from the payload Ethernet fabric channel.

  • Page 24: Figure 1-1 Functional Block Diagram Of The Centellis 2X00 Chassis

    Introduction Introduction Figure 1-1 Functional Block Diagram of the Centellis 2x00 Chassis Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 25: Hardware

    Introduction Hardware The following figure gives an overview about the main parts of the board. Figure 1-2 Overview Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 26: Functional Characteristics

    Introduction Introduction Figure 1-3 Block Diagram 1.2.1 Functional Characteristics  Transceiver – BCM8706 10GE Serial-to-XAUI 10GBASE-LRM transceiver – Compliant to IEEE 802.3ae and IEEE 802.3aq Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 27: Standard Compliances

    – Local power generation of +5.0V, +3.3V and +1.0V  Power on reset generation and power supervision Standard Compliances The Centellis 2x00 User Card-10GE, when installed in a compliant chassis, meets the following standards: Table 1-1 Standard Compliances Standard Description...

  • Page 28: Ordering And Support Information

    Refer to Appendix A, Related Documentation or consult your local SMART Embedded Computing sales representative for the availability of other variants. For technical assistance, documentation, or to report product damage or shortages, contact your local SMART Embedded Computing sales representative or visit https://www.smartembedded.com/ec/support/.

  • Page 29: Centellis 2X00 User Card-10Ge Hardware

    Chapter 2 Centellis 2x00 User Card-10GE Hardware Overview The Centellis 2x00 User Card-10GE is compliant to PICMG 3.0 R3.0 (AdvancedTCA). The shelf manager and hub board is equipped with two backplane connectors. Figure 2-1 Hardware To prevent connector damage the alignment pin offers a guide rail to the slot and a coding mechanism to ensure the installation of the board in the matching slot.

  • Page 30: Payload Hardware

    2.2.1 Ethernet Interfaces The Ethernet interfaces on the Centellis 2x00 User Card-10GE interface between the 10GBASE-BX4 Ethernet (XAUI) coming from the backplane fabric channel 1 and the 10GBASE-LRM Ethernet of the SFP+ module located on the front panel. The board uses an BCM8706 transceiver to support uplink functionality from the payload blade.

  • Page 31: Power Supply

    An EMI filter at the power input ensures conducted emission levels below EN 55022 class 2.4.1 On-board and External Supply The Centellis 2x00 User Card-10GE has no provisions to switch off the power input. The board is powered whenever the power is attached to the Centellis 2x00 system (-40VDC to -72VDC).

  • Page 32: Installing And Removing Sfp/ Sfp+ Modules

    The presence and also the type of SFP/SFP+ modules is automatically detected. The maximum power consumption of all installed SFP/SFP+ modules must not exceed 12 W. 2.5.1 Installing an SFP/SFP+ Module Procedure In order to install an SFP/SFP+ module, proceed as follows: Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 33 Dirt and damage can render the SFP/SFP+ module inoperable. Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+ module. When no cable is connected, cover the port with an optical port plug. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 34: Removing An Sfp/Sfp+ Module

    3. Connect the network cable to the SFP/SFP+ module. 2.5.2 Removing an SFP/SFP+ Module Procedure In order to remove an SFP/SFP+ module, proceed as follows: 1. Remove any connected cable from the SFP module. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 35 2. Open the SFP/SFP+ latch. Note that the latch mechanism of your SFP/SFP+ module may be slightly different compared to the latch shown in the following figure. 3. Grasp the SFP/SFP+ module and carefully slide it out of the slot. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 36: Frame Ground And Esd

    The face plate mounting holes of the board are connected to frame ground. An ESD strip according to the AdvancedTCA specification PICMG 3.0 R3.0 is provided at one edge of the PCB. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 37: Controls, Indicators And Connectors

    Blinking: The board boots up. Blue: The Centellis 2x00 User Card-10GE is ready to be extracted. Blue Off: The Centellis 2x00 User Card-10GE is not ready to be extracted. Do not remove the board during this state. 3.1.2 Ethernet Connectors A SFP+ port located on the front panel allows for Ethernet connectivity from the payload to an external device.

  • Page 38: Sensors

    Controls, Indicators and Connectors Sensors The IPMC functionality is based on the IPMI specification V1.5. The IPMI sensors on the Centellis 2x00 User Card-10GE are shownTable 3-2. For further information, see the Centellis 2000 User Card-10 GE: Control via IPMI Programmer’s Reference.
  • Page 39 +3.3V sensor VOLTAGE_5_0 Voltage (02h) +5.0V sensor Threshold (1) Temperature TEMPERATURE0 Temperature (01h) Threshold (1) sensor 0 Temperature TEMPERATURE1 Temperature (01h) Threshold (1) sensor 2 SFP_TEMPERATURE Temperature SFP Temperature Threshold (1) (01h) sensor Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 40 Controls, Indicators and Connectors Controls, Indicators and Connectors Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 41: Board Exchange

    Chapter 4 Board Exchange Introduction This chapter describes how to install the Centellis 2x00 User Card-10GE board and includes the following information:  Before installation  Installing the board in a shelf  Starting up the board  Removing the board ...

  • Page 42: Table 4-1 Environmental Requirements

    Blade level packaging Shock Half-sine, 11mSec, 30m/Sec Half-sine, 6mSec at 180m/Sec 200mm/all edges and corners 1.0 m (packaged) per ETSI 300 019-2-2 Free fall (Blade level packaging) 100mm (unpackaged) per GR-63- CORE Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 43: Power Requirements

    Each input has to be equipped with an additional fuse of max. 90A located either in the shelf where the board is installed or the power entry module (PEM). 4.2.1.3 Required Equipment Gather the following equipment before starting:  Screwdriver  ESD wrist strap Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 44: Unpacking And Inspecting The Board

    Touching the board or electronic components in a non-ESD protected environment causes component and board damage. Before touching boards or electronic components, make sure that you are working in an ESD-safe environment or wear ESD wrist straps. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 45: Removing The Board

    1. To extract the active shelf manager initiate a switchover. Otherwise continue with the next step. 2. Put on an ESD wrist strap. 3. Connect the strap to the shelf by attaching it to the front or rear ESD jack /ESD snap. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 46 "extraction pending", so that the blue LED is still blinking. 6. Wait until the blue LED is illuminated. 7. Remove the board from the shelf using the extraction handles. Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)

  • Page 47: Related Documentation

    Centellis 2000 DS Centellis 2000 DC Release 1.2 Installation and Use 6806800J13 Centellis 2000 AC Installation and Use 6806800J87 Centellis 2x00 User Card-10GE: Control via IPMI Programmer’s 6806800K89 Reference System Management Interface Based on HPI-B 6806800P20 (Centellis 2000/2100/4411) User’s Guide Related Specifications For additional information, refer to the following table for related specifications.
  • Page 48 Related Documentation Centellis 2x00 User Card-10GE Installation and Use (6806800H33E)
  • Page 50 © 2020 SMART Embedded Computing™, Inc. All Rights Reserved. The stylized “S” and “SMART” is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names and logos...

Table of Contents