Connections - Yamaha SW-2 Owner's Manual

• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
• When making connections between this unit and other components, be sure all connections are made correctly and consistently,
that is to say L (left) to L, R (right) to R, "+" to "+" and "–" to "–".
• This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of
the ways shown below according to your audio system. Also, refer to the owner's manual for each component to be connected
to this unit.
CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER
Disconnect your main speakers from the amplifier and connect them to this unit.
If using one unit
This unit
STANDBY-RED ON-GREEN
POWER HIGH CUT VOLUME
50 Hz 150 Hz 0
To AC outlet
Right speaker
If using two units
This unit
INPUT2 INPUT1
AUTO FROM AMPLIFIER
POWER
ON OFF
STANDBY-RED
ON-GREEN
POWER HIGH CUT VOLUME
50 Hz 150 Hz 0 10
OUTPUT
TO SPEAKERS
To AC outlet
Right speaker
6

CONNECTIONS

INPUT2 INPUT1
AUTO
POWER FROM AMPLIFIER
ON OFF
10
OUTPUT
TO SPEAKERS
INPUT2
FROM AMPLIFIER
INPUT2 INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT1
OUTPUT
TO SPEAKERS
Left speaker
Amplifier
INPUT2 INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
Amplifier
This unit
INPUT2 INPUT1
AUTO FROM AMPLIFIER
POWER
ON OFF
STANDBY-RED
ON-GREEN
POWER HIGH CUT VOLUME
50 Hz 150 Hz 0 10
OUTPUT
TO SPEAKERS
To AC outlet
Left speaker