Packing Content; Installation - video1one TFT9701 User Manual

Connections
The following connections are located on the backside of the monitor.
01. Connect the AC adapter with the power line cable. Afterwards use this power link to connect the monitor
with a socket. The AC adapter is dadicated for an input voltage of 100~240V AC.
02. Use a video line to connect the monitor with a unit like a camera or a recorder. Use the connections
AV (BNC), VGA or HDMI.
03. Turn the monitor and the connected unit (like camera or recorder) on now.
04. If the information "No signal" eppears, please check the video line and the signal. If necessary, change the
input signal on the monitor with the button SELECT.
05. Turn off the monitor, if you don't use it.
Video signals
Connection / Parameter
PC (VGA) Input Input signal
Input level
Horizontal frequence
Vertical frequence
Maximal resolution
BNC Input
HDMI Input Maximal resolution
BNC Output
LED Status indicator
Green: Power on
Red: Standby / Power off
Description
Analog (RGB)
0,7
30~60
56~75
1024x768 @ 75Hz
1
1080I / 1080P
1
DC IN: Power Input
HDMI: HDMI Input
VGA: VGA Input
AV IN: BNC Input
AV OUT: BNC Output
Unit / comment
getrennt
Vp-p, 75 Ohm
KHz
Hz
Vp-p, PAL / NTSC / SECAM
with HDCP
Vp-p

Installation

9