Summary of Contents for MAG POCS-500
- Page 1 OZONE SANITISER USER MANUAL Contact us for information or support: 01422 244733 info@laundrymachines.co.uk...
-
Page 2: Table Of Contents
........Technical Specifications GENERAL INFORMATION The MAG Ozone Sanitiser is a mobile and easy to use cleaning & deodorising system for indoor use. The robust product has high safety standards to quickly and efficiently create Ozone, then decompose this into Oxygen, allowing immediate access to treated spaces at the end of each cycle. -
Page 3: Safety Precautions & Warnings
SAFETY PRECAUTIONS & WARNINGS Read this manual carefully before operating the unit Do not expose the equipment to rain or moisture. Should any liquid come into contact with the system, unplug it and contact your supplier, or a qualified person, before operating it further. Unplug the equipment when the product is not in use. - Page 4 Large: for room volumes between 60m³ and 120m³ X-Large: for room volumes between 120m³ and 500m³ Note: For Large and X-Large rooms contact MAG with your room dimensions for a recommend air circulator (if required). The display will now prompt: Set Time Select the Short / Intermediate / Long cycle time by pressing the relevant keyboard button.
- Page 5 Operation Complete and the amber light should have stopped flashing. CAUTION In the event indications do not correspond to the above, leave the room immediately and contact MAG on 01422 244733. After the cycle is completed unplug the unit before moving this to the next location.
-
Page 6: Activation, Deactivation & Operating Times
ACTIVATION, DEACTIVATION & TOTAL OPERATING TIMES Generation Time = G Decomposition = D Total Cycle Time = T Inter = Intermediate Default Default Default Short Inter Long Time (minutes) Room Volume Small (<30mm Medium (30 - 60mm Large (60 - 120mm 1318 1440 X-Large (>120mm... -
Page 7: Maintenance & Service
To book your maintenance visit contact MAG Equipment on 01422 244733 or email service@laundrymachines.co.uk Alternatively MAG can provide training or video assistance to a competent person with a “good pair of hands” that can follow these instructions. The maintenance procedure should take around 1 hour to complete. CAUTION... - Page 8 STEP 2 - CLEANING OZONE GENERATING CORES (SINGLETS) (a) There are two singlets to remove and clean which are located side by side in the unit (b) Pull out the electrical cable of the Singlet core on the right side of Figure D and disconnect the electrical connector.
-
Page 9: Troubleshooting
Red light (fault indication) is Make note of the fault code indicated on the display. ON and the display indicates Disconnect (unplug) the unit and contact MAG for fault code “AL: Presso-stat” assistance. or “AL: Micro-Switch” Display shows: “Needs This notification will appear every 500 hours of use to Service”... -
Page 10: Warranty
MAG and will be free from defects in materials and workmanship under normal use and conditions for the applicable warranty period. The warranty period is 1 year, commencing on the date of purchase. -
Page 11: Technical Specifications
Humidity: maximum relative humidity: 95%; Aluminium and plastic enclosure MAG Equipment Ltd has a policy of continuous product improvement and reserves the right to modify or change this specification at any time without notice. For support call 01422 244733 or email info@laundrymachines.co.uk... - Page 12 OZONE SANITISER USER MANUAL Contact us for information or support: MAG Equipment Ltd, MAG House, Chatham Street, Halifax, HX1 5BU 01422 244733 info@laundrymachines.co.uk www.maglaundryequipment.co.uk...
Need help?
Do you have a question about the POCS-500 and is the answer not in the manual?
Questions and answers