Advertisement
Quick Links
Please read the following instruction carefully before
operating your Axis Meat Grinder
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Plug only into grounded electrical outlets matching the nameplate
voltage.
• Do not operate unattended.
• Do not operate equipment around children.
• Do not use an extension cord with this equipment. Do not plug this
equipment into a power strip.
• Check equipment before each use to insure the equipment is clean.
• Do not wear loose fitting garments while operating this equipment.
• Use equipment in a flat, level position.
• Unplug equipment, turn off and let it cool before cleaning or moving.
• Do not spray controls or outside of equipment with liquids or
cleaning agents.
• Do not clean the equipment with steel wool.
• Keep equipment and power cord away from open flames, electric
burners or excessive heat.
• Do not operate if equipment has been damaged or is malfunctioning
in any way.
AX-MG12 MG22 USER MANUAL
5659 Royalmount Ave.
Montreal, QC H4P2P9
Tel: 514-737-9701 888-275-4538
Fax: 514-342-3854 877-453-8832
service@mvpgroupcorp.com
sales@mvpgroupcorp.com
AX-MG12
AX-MG22
UNPACKING THE EQUIPMENT AND INITIAL SETUP
1. Remove all packing material and tape, as well as any protective
plastic from the equipment.
2. Clean any glue residue left over from the plastic or tape.
12000 Biscayne Blvd. Ste 108
Miami, FL 33181
Tel: 786-600-4687 844-218-8477
Fax: 786-661-4100
www.mvpgroupcorp.com
Advertisement
Summary of Contents for Axis AX-MG12
- Page 1 AX-MG12 MG22 USER MANUAL Please read the following instruction carefully before operating your Axis Meat Grinder SAFETY PRECAUTIONS To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.
- Page 2 FEATURES AND CONTROLS OPERATION WARNING 4-------------------- Entanglement Hazard 1-------------- Never place fingers, hands or other objects into the feed chute -------------------------7 other than the food pusher provided with the appliance. Injury --------------------9 and product damage will occur. 2---------------- 3-------------------- ---------8 WARNING Electrical Shock Hazard 6-----------------------------...
- Page 3 DISASSEMBLY ASSEMBLY 1. Turn the control switch to the “OFF” position and unplug the grinder. 1. Assemble the blade shaft assembly into the worm gear. 2. Remove the grinder chamber assembly from the body of the grinder. 3. Unscrew the faceplate from the grinder head assembly. 2.
- Page 4 CLEANING To maintain the appearance and increase the service life, clean this WARNING equipment daily. Electrical Shock Hazard 1. Turn off and unplug the grinder Keep water and other liquids from entering the inside of the 2. Wash all components in the dishwasher or a in a solution of mild equipment.