JobSmart 3951103 Assembly & Operating Instructions

Abrasive blast cabinet

Hide thumbs

Table of Contents

Quick Links

3951103

Abrasive Blast Cabinet

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual provides important information on proper operation and maintenance. Every effort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time

without prior notice.

STOP!

DO NOT RETURN THIS PRODUCT TO THE RETAILER.

Questions? Problems? CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website

http://www.buffalotools.com

or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales

receipt is required.

Table of Contents

Need help?

Do you have a question about the 3951103 and is the answer not in the manual?

Questions and answers

Summary of Contents for JobSmart 3951103

Page 1 3951103 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice.
Page 2 This is a safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 3 FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE IMPORTANT SAFETY RULES COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 4 Safety glasses and ear protection must be worn during operation. SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a risk of injury. 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 5 Size of Drill Bits, Grinding Wheels, etc. No Load Speed No-load Rotational Speed …/min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute 1,2,3… Ring Selector Settings Speed, Torque or Position Settings 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 6 The Sand will feed from the air tube. The air hose is attached to the base of the gun. Connect the air compressor. Set the compressor pressure regulator to 80 PSI. Do not exceed 80 PSI. Open the cabinet window and place the work piece in the center. Close the window securely. 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 7 PARTS DIAGRAM PARTS LIST Part # Description SBC901 Grid SBC902 Fluorescent Tube 12V SBC903 End Connector SBC904 Plastic Cover SBC905 Input Cable Assembly SBC906 Cable Gland Assembly SBC907 Power Cable Assembly 3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions...
Page 8 SBC908 Main Filter SBC909 Secondary Filter SBC9010 Retaining disc SBC9011 Rubber Gloves (pair) SBC9012 Worm Drive Clip SBC9013 Clear Plastic Lid SBC9014 Knob SBC9015 Lid Retaining Chain SBC9016 Replaceable Plastic Window SBC9017 Window Retaining Strip SBC9018 Lid Hinge SBC9019 Fluorescent Tube Clip SBC9020 Air Vent Foam Packing SBC9021...