Download Print this page

Date And Time Setting; Alarm Clock Setting - C4i IR D3 User Manual

Internet radio speaker

Advertisement

3, Once connect successfully, it will show "Bluetooth Connected" on display.
4, Short Press ENTER button to play or pause the music. Turn the SKIP knob to go previous or next songs.
5, Long press ENTER button to disconnect Bluetooth, Long press ENTER button again to reconnect Bluetooth.
6, The device will search associated picture on internet for the song which is playing. Short press ▶button to zoom out the
picture.
USB music play
1, Insert USB flash drive, it will show USB connect symbol on top right side of display.
2, Press MODE button to switch to USB mode, and press ENTER button to play songs from the USB flash drive .
3, Turn SKIP knob to select the songs from USB and press ENTER button to play.
4, Press ▶button to select if delete the song. Press ◀button, back to superior menu.
5, Short Press ENTER button to play or pause the music.
AUX music play
1, Connect the device and your smart phone or MP3 player via 3.5mm Aux cable.
2, Press MODE button to switch to AUX mode, and press ENTER button to enter AUX mode.
3, Play music from your smart phone or M3 player via the device IRD3.
Date&Time Setting
A- Under WIFI connection, the device will automatically synchronize the local time.
B- Manual clock setting :
Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶ ) to select "configuration" and
1,
press ENTER button.
urn SKIP knob to select "
2, T
Time". Press ENTER button→ select "Manual Setup"and press ENTER button→Enter into "Set Date and
Time" interface.
3, Turn SKIP knob to
Then Press ENTER button to confirm Date&Time setting.
4, Press MENU button to return

Alarm clock Setting

This device can set 2 sets of alarms, operation as below:
1, Press MENU button to enter Main menu , then turn SKIP knob ( or press ◀▶ ) to select "configuration" and
press ENTER button.
urn SKIP knob to select "Alarm" , then press ENTER button to enter Alarm setting.
2, T
3,
Turn SKIP knob to select Alarm 1 / Alarm 2 / NAP Alarm / Alarm Volume.
For
Alarm 1 / Alarm 2, you can set different Repeat days and different Alarm sound.
Enter Repeat submenu : Everyday/Once/Mon/Tue/Wed/Thu/Fri/Sat/Sun
Enter Sound submenu : Beep/Melody/Internet Radio/FM/DAB/DAB+/USB
Enter Time submenu : Turn
Date&Time
" , then press ENTER button and turn SKIP knob to select "Set
adjust the numbers , Press ▶button to confirm and go to month/year/minutes/hours setting.
Main menu.
SKIP knob to set how long does the alarm clock go off.
Date and

Advertisement

loading