Advertisement
Quick Links
Z-2 BASE
Adapter for standalone controllers and readers programming using PC
1. OVERVIEW
Z-2 BASE Computer Adapter is a multifunctional device serving the following purposes:
- Programming of standalone controllers Z-5R, Matrix-II K by loading the keys/cards database
from a PC directly to controller memory via a special socket, or storing that database from
controller memory to a PC.
- Saving the keys/cards database from a PC into a DS1996L-compliant key, for further copying
into Z-5R or Matrix-II K controllers at the customer's site, and from customer's site to a
DS1996L-compliant key to a PC).
- Connecting any card standard reader (EM-Marine, Mifare, HID etc.) to a PC via iButton
(Dallas Touch Memory) or Wiegand protocol, -- so that card serial numbers can be fed into the
PC. A built-in 12 V DC voltage converter providing up to 150 mA current allows powering the
connected reader right from this adapter, without a need for a power converter. It is also
possible to control the indication on a connected reader by commands from the PC.
- Connecting to a PC via keyboard emulation protocol (USB-HID) to enter the acquired serial
numbers in a specified text format, as if from a standard keyboard. (Custom firmware version
required).
- Connecting to an external controller via a card reader emulation (iButton or Wiegand
protocols), to transmit acquired cards/keys serial numbers to that controller by commands from
a PC.
- Most of the listed above tasks are solved by the BaseZ5R software, available FREE from
http://www.ironlogic.
2. INITIAL POWER-ON
Because the adapter draws quite significant current from a PC USB port, we recommend to connect
with the cable supplied with device. Work with other cables is not guaranteed.
Before initial power-on, please download drivers from http://www.ironlogic.
a folder of your choice.
Connect the adapter to a PC USB port, wait for system requesting a driver location and point it to the
folder with unpacked driver files.
After the driver is installed, Device Manager will list another COM port. This confirms that the
installation was correct.
Features of this device are defined by the firmware downloaded into it and control software for PC.
Useful information about working with this adapter can be found on the manufacturer's website at
http://www.ironlogic.
Z-2 BASE
User Manual
me.
me.
www.ironlogic.me
me
and unpack them to
page 1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Iron logic Z-2 BASE
- Page 1 User Manual 1. OVERVIEW Z-2 BASE Computer Adapter is a multifunctional device serving the following purposes: - Programming of standalone controllers Z-5R, Matrix-II K by loading the keys/cards database from a PC directly to controller memory via a special socket, or storing that database from controller memory to a PC.
- Page 2 Z-2 BASE www.ironlogic.me 3. SPECIFICATIONS Computer Interface: ...............USB 2.0 (CDC/HID) Max. distance from a PC: ..................1.8 m. Consumption current from a USB port: ..............100 mA. Consumption current with reader attached: ............≤ 450 mA. Maximum allowed consumption current from a 12 V converter: ......150 mA.
- Page 3 Z-2 BASE www.ironlogic.me 5. VISUAL INDICATION Fl ashi ng green LED m eans that the dev ice i s powered f rom a USB port and operati ng normally. Red LED denotes the correct +12V +12 V conv erter operation.
- Page 4 Z-2 BASE www.ironlogic.me 7. PROGRAMMING VIA SOCKET 1 CONNECTOR Z-2 BASE To work directly with standalone controllers' memory, this adapter has a connector called Socket 1. The Socket 1 connector provides power to the connected controller and enables the data...
- Page 5 Z-2 BASE www.ironlogic.me 7.2. Connecting a Matrix-II K. The Figure shows how to connect a Matrix-II K controller to this adapter. Connection is possible at any time. 7.3. Working with a DS1996L-compliant Key To work with a DS1996L-compliant key, connect a contactor as shown on this Figure.
- Page 6 Z-2 BASE www.ironlogic.me MATRIX-II EH 8.1. Via Wiegand protocol Here is an example of how to connect a reader via DATA 0 Wiegand protocol. The reader is powered from the DATA 1 adapter. When a code is transmitted (once) by the...
- Page 7 Z-2 BASE www.ironlogic.me 9. CONNECTING IN KEYBOARD EMULATION MODE To set an adapter into keyboard emulation mode, use Prg_RDAII.exe software to load USB_HID_Vxx.rom custom ROM into the adapter. The necessary files are located in the drivers distribution archive. When the custom firmware has been flashed, the PC operating system detects a new keyboard.
- Page 8 The adapter PCB compact size allows even installing it inside another external reader casing. In this case, however, please ensure that USB cable connector is somehow fixed in place, as there are no mounting bits provided for it. 12. PACKAGE CONTENTS. Z-2 BASE Adapter ........USB AB cable ..........
- Page 9 Z-2 BASE www.ironlogic.me 15. IRONLOGIC CONTACTS Headquarters: RF Enabled ID Limited 34 Ely Place, London, EC1N 6TD, UK E-mail: marketing@rfenabled.com Development and production: AVS LLC 7, Bobruiskaya street, Saint-Petersburg, 195009, Russian Federation E-mail: marketing@rfenabled.com Phone: +78122411853; +78125421185 www.ironlogic.ru Authorized representative in the European Union:...
Need help?
Do you have a question about the Z-2 BASE and is the answer not in the manual?
Questions and answers