Roland AX-Edge Install Manual page 2

SOUND PACK/WAVE EXPANSION Install Manual
10.
To execute, press the [ENTER] button.
When import is completed, the message "ImportCompleted!"
appears.
NOTE
Never turn off the power or disconnect the USB flash drive during a
process, such as while the "Processing..." display is shown.
Installing a WAVE EXPANSION
1.
While pressing the [ENTER] button, turn on the
power.
The EXPANSION top screen appears.
to Uninstall
(cursor [K] button)
EXPANSION
ÄEXZ001 StgPno1
List of installed WAVE EXPANSION files
([-] [+] buttons)
2.
Press the cursor [J] button to move to the
installation screen.
3.
Use the [-] [+] buttons to select the file that you want
to install, and then press the [ENTER] button.
A confirmation screen appears.
If you decide to cancel, press the [EXIT] button.
MEMO
The first time you install, the user license registration screen
appears.
To continue the installation, press the [ENTER] button.
4.
To execute , and then press the [ENTER] button.
Uninstalling a WAVE EXPANSION
If there is insufficient free memory space, uninstalling a previously
installed WAVE EXPANSION will let you install a new WAVE
EXPANSION.
1.
2.
to Install
(cursor [J] button)
3.
À
User License
SOUND PACK and WAVE EXPANSION are associated with the user
licenses of the user who downloaded them.
SOUND PACK or WAVE EXPANSION that have differing user licenses
cannot be imported into the same AX-Edge.
If you want to import or install SOUND PACK and WAVE
EXPANSION that has a different user license than what is already
registered to this AX-Edge unit, you must initialize the user licenses
by performing the procedure described in "Initializing the User
Licenses While Preserving the User Data" (p. 3).
While pressing the [ENTER] button, turn on the
power.
The EXPANSION top screen appears.
Use the [-] [+] buttons to select the file that you want
to uninstall, and then press the cursor [K] button to
move to the uninstallation screen.
A confirmation screen appears.
If you decide to cancel, press the [EXIT] button.
To execute, press the [ENTER] button.
User A
A A
EXZ001
A
Initialize
A
User A User B
B
EXZ002 EXZ002
A
User A User B
B
EXZ002 EXZ002
the Factory Settings
2