Related Manuals for Finlux FEM-1793
Summary of Contents for Finlux FEM-1793
- Page 1 ESPRESSO COFFEE MAKER MODEL: FEM-1793 Read this booklet thoroughly before using and save it for future reference...
- Page 2 IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Before using checks that the voltage of wall outlet corresponds to coffee maker rating plate. 2. The appliance must be earthed. 3.
-
Page 3: Know Your Coffee Maker
HOUSEHOLD USE ONLY KNOW YOUR COFFEE MAKER 1. Water tank cover 2. Water tank 3. Upper cover 4. Steam control knob 5. Pressure meter 6. Steam pipes 7. Steamer nozzle 8. Main body 9. Measuring spoon and tamper 10. Power switch 11. -
Page 4: Before The First Use
BEFORE THE FIRST USE To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as follows: 1. Pour water into water tank, the water level should not exceed the “MAX” mark in the tank. - Page 5 appliance before making coffee, including the funnel, filter and cup, so that the coffee flavour can not be influenced by the cold parts. 1. Remove the detachable tank and open the tank cover to fill it with desired water, the water level should not exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
- Page 6 3. Pour out the hot water in the cup. Then place the hot cup (yourself cup) on removable shelf. 4. At the time, the green lamp is illuminated, if the green lamp is extinguished, wait for a moment, once the green lamp is illuminated, and you should press the coffee/hot water selector on the “1”...
- Page 7 Method: 1. Prepare espresso first with container big enough according to the part “MAKE ESPRESSO COFFEE”, make sure that the steam control knob is at the “OFF” or “0” position. 2. Press the steam switch to the “1” position, waiting for until the green indicator is illuminated.
- Page 8 7. Pour the frothed milk into the espresso prepared; now the cappuccino is ready. Sweeten to taste and if desired, sprinkle the froth with a little cocoa powder. 8. Press the ON/OFF switch to the “0” position to cut the power source off. Note: we recommend you allow the maker to cool down at least for 5 min before making coffee again.
-
Page 9: Clean And Maintenance
into the appliance properly. 2. Replace the tank, then connecting the appliance to power supply source. 3. Press the ON/OFF switch to the “1” position, the red lamp is illuminated. 4. Turn the steam control knob to “OFF” or “0” position， make the coffee/hot water selector on the “1”... -
Page 10: Troubleshooting
instead of the descaler (the one hundred parts of water and three parts of citric acid). 3. According to the program of pre-heating, put the metal funnel (no coffee powder in it) and carafe (jug) in place. Brewing water per “PRE-HEATING”. 4. - Page 11 There is some coffee powder Get rid of them. Water leaks out of outer side of on filter edge. filter. clean correctly after Clean coffee maker per the content in “before the first use” cleaning mineral deposits. for several times. The coffee powder is stored in Please use fresh coffee powder, Acid (vinegar) taste exists in...
Need help?
Do you have a question about the FEM-1793 and is the answer not in the manual?
Questions and answers