Table of Contents
Advertisement
DISPLAY
KIN Play Sound Bar is equipped with a display that indicates power status,
input, volume setting, tone control, pairing, and EQ effect. The display
disappears approximately 15 seconds after the last function is engaged.
The display also has the subwoofer pairing button integrated into it at the
bottom center. See Subwoofer pairing instructions to use this feature.
EQ SETTINGS
Pure: Natural, unequalized sound with a wide and smooth response. This is the sound the artist and
Totem intended it to be and can be considered the factory default setting.
Concert: Flat response with slightly elevated top end and bottom end that creates a live atmosphere.
Movies: Slightly more dynamic peaks than concert to enhance the theater experience.
TV: Enhances a wide portion of the midrange to add clarity to voices.
Night: Provides dynamic range and intelligibility at minimal output levels, perfect for moments of
listening at low volume.
Games: Highs and bass are generously boosted for an improved gaming experience.
TABLETOP PLACEMENT
Attach the six adhesive backed feet to the bottom corners and
center of the cabinet. This will help isolate the KIN Play Soundbar
from the surface to eliminate distortion causing resonance.
Position it 6" or more from the rear wall for optimal performance.
WALL MOUNTING
Use THE provided template to accurately determine the proper location for the 2 wall bracket pieces.
The KIN Sound Bar is far more substantial than most sound bars so be sure to use suitably robust
hardware to secure it. Install the 4 included rubber bumpers on the back at the corners to add
stability, hold it straight, and prevent transferring resonance to the wall. KIN Play Sound Bar is also
equipped inserts spaced at 600mm as per VESA standards.
STANDBY AND AUTO ON
When no audio input has been detected for 60 minutes, the KIN Play with go into Standby mode. If the
same audio signal that was playing when it entered standby mode returns, it will wake. KIN Play Sound
Bar can also be "woken" by pressing the standby button on the remote or control panel.
Totemacoustic.com
Advertisement
Table of Contents
