Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Enovap EN1
- Page 2 Output voltage: DC 4.2V. flavor cocktail 500mA. If you want to create your own flavor Passthrough: cocktails, you can use Enovap with the A protection feature means you can ‘Flavor Mix’ concept. vape while the product is charging. Please read this instruction manual carefully before using your product.
- Page 3 Drawing of components Refill holes Enovap pods Drip tip Airflow Lock / Unlock Fire button Screen Up button Menu button Down button USB port Battery hatch...
-
Page 4: Table Of Contents
SUMMARY SET UP Inserting the battery in your Enovap SET UP Slide the black button of the hatch Inserting the battery located under the device and release in your Enovap it to insert the battery (negative side downwards). Charging your Enovap... -
Page 5: Charging Your Enovap
Whenever you want to turn your device on or off, press the ‘Fire button’ Please read the section ‘Operating 5 times in a row. modes’ on page 12 to fill your Enovap with the suitable e-Liquids depending on your operating mode. - Page 6 Reset the upper and lower parts and lock them together by moving the button to the left. We recommend using Enovap with a. unlock c. refill Enovap e-Liquids with 50% PG and 50% VG as all certification tests were performed on this range of e-Liquids.
-
Page 7: Operating Modes
Operating modes To choose your operating mode, go to the ‘Settings’ screen shown Your Enovap has 3 operating modes. below by pressing on the button The ‘Hit Control’ mode is activated twice on the main screen. by default. The main screen displayed shows the mode of operation you have Once you are on the ‘Set-... - Page 8 On the main screen, you can now choose the nicotine concentration that For more information on this mode of you wish to vape at any moment using use, please download the Enovap mo- buttons. bile application (find more details on how to download the application on...
-
Page 9: Adjusting The Airflow
‘airflow’ button upwards, as shown in the diagram below. It allows you to adjust the amount of You should make sure that you are not vapor generated by your Enovap using covering the air inlet with your fingers buttons. when you vape. -
Page 10: Maintaining Your Enovap
It Maintaining your Enovap shows the duration of the puff. To clean your Enovap, move the button to the right and slide the upper part of the device to separate it from the lower part. - Page 11 10 seconds to reboot your Enovap. Temperature is too high This message appears if the tempe- rature inside the product is too high.
-
Page 12: Interfaces
Interfaces briefly press on the button Main menu The main screen changes according to the selected mode of operation Press 3 seconds on to access the ‘Settings’ menu Settings menu Screens 2 and 3 are displayed ‘Auto’ or ‘Hit Control’ modes are selected Press 3 seconds on to go back to the main menu... -
Page 13: Important Information
Important information The use of your Enovap is foreseen for temperatures between 0 and 40°C. Do not use the device if you or If you use your Enovap outside of someone near you uses oxygen. these temperatures, it could become damaged or stop working. - Page 14 Nicotine is highly addictive. Its by Kangertech / Shenzen. consumption by non-smokers is not recommended. Model number: EN1 This product should not be used by: people under the age of 18. ENOVAP CARE This product is not recommended for:...
Need help?
Do you have a question about the EN1 and is the answer not in the manual?
Questions and answers