Philips Star Wars SBT720 Manual page 16

16
English
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
Only the cutting unit and the comb can be
cleaned with water.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb and clean it with the
cleaning brush and/or rinse it under the tap.
4 Remove the cutting unit and clean it under the
tap.
5 Carefully shake off excess water and let the
cutting unit air-dry completely.
Never dry the cutting unit with a towel or
tissue, as this may damage the trimming teeth.
6 Shake out the hairs that have collected in the
hair chamber.
7 Brush out the hairs with the cleaning brush or
cleaning sponge supplied.