Table of Contents
Advertisement
Quick Links
H4X4-4K18G
4X4 HDMI MATRIX, HDR, UHD, 4Kx2K, 18Gbps
The 4x4 HDMI Matrix Switcher allows you to route any of the 4 HDMI input sources to any of the HDMI out display
locations. It supports resolutions up to 4Kx2K 4:4:4 (HDMI 2.0).
Features:
>
Connects up to 4 HDMI sources to 4 HDMI display monitors
>
HDMI 2.0 with 3D, HDCP 2.2 & DVI1.1 Compliant
>
Ultra-high-definition video up to 4K 60Hz @ 4:4:4 18Gbps (6Gbps per color)
>
Support HDR10, Dolby Vision, HLG
>
Supports up to, Dolby TrueHD, Dolby ATMOS, DTS-HD MA, DTS:X, LPCM 7.1 @ 192KHz
>
Supports ARC (Audio Return Channel)
>
Multiple control methods: Front panel buttons/ IR remote control/ Web UI Control/ and RS232
Control
>
Built-in LCM screen & LED button at front panel provides quick view of all port connection
>
Rack mountable (1U design)
>
S/PDIF coaxial audio outputs allow audio to be de-embedded from HDMI outputs
>
Support HDMI cable lock on each HDMI input/output port
Package Includes:
Matrix x 1 piece
IR Blaster x 1
Power adapter x 1 piece
Instructions
Panel View:
Advertisement
Table of Contents
Summary of Contents for ZUUM H4X4-4K18G
- Page 1 H4X4-4K18G 4X4 HDMI MATRIX, HDR, UHD, 4Kx2K, 18Gbps The 4x4 HDMI Matrix Switcher allows you to route any of the 4 HDMI input sources to any of the HDMI out display locations. It supports resolutions up to 4Kx2K 4:4:4 (HDMI 2.0).
- Page 2 Feature LED Status Description Receiving IR remote signal IR receiver Blue ON Power ON POWER Red ON Standby LCM Display Display operating status or Menu Go up direction in Menu UP Button Go down direction in Menu DOWN Button Go left direction in Menu LEFT Button Go right direction in Menu RIGHT Button...
-
Page 3: Hdmi Matrix
3.0 LCM Panel Function: Power on Main Screen 4 X 4 HDMI MATRIX Version V1.00 After power on, the main screen will show matrix name and version information. The matrix will go back to main screen if no operations in 30 seconds Channel Switching: OUTPUT 1 2 3 4... - Page 4 4.0 LCM Main MENU Function Operations: 4.1 SWITCH ： (Default: 1 2 3 4) OUTPUT 1 2 3 4 INPUT 1 2 3 4 This function is used to switch the input/output port. Enter the SWITCH menu. Press the ENTER key, then the LCM second line INPUT will flash.
- Page 5 UP or DOWN button to change the numbers , press LEFT or RIGHT to move to another location, the move to a position number will flash, press ENTER to complete the setting. Subnet Mask: (Default 255.255.255.0) www.zuum.life ZM1072020...
-
Page 6: Media Type
IR Remote setting: Press and hold the POWER button, then press the number button which can be set from 0 to 9, total 10 groups. These settings on IR01 remote control have to be done the first time you use the IR01 or when you change the batteries. www.zuum.life ZM1072020... -
Page 7: System Info
This function can set the output of SPDIF to HDMI (H) or ARC (A). OUTPUT 1 2 3 4 AUDIO H H H H 4.7 SYSTEM INFO: Display H4X4-4K18G Matrix firmware version *1. MAIN V1.00 2. WEB V1.00 3. CPLD V1.00... - Page 8 For example: to switch output port 1 to input port 4, press 1 (OUTPUT 1) and then press 7 (INPUT 4). * Using quick key operation, LCM screen will jump to the output / input setting page; it will not allow you to use the front panel button to operate the H4X4-4K18G Matrix www.zuum.life...
- Page 9 6.0 Remote Control Function: (CONSOLE) H4X4-4K18G support RS232 and TCP/IP control by same command as below: For RS232 CONSOLE: Connect the RS232 CONSOLE port to the COM port of the host by a F/M RS232 straight cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5).
-
Page 10: Initial Ip Configuration
OFF. It can change the display name by the Aliases page. Reload Get MATRIX host message Advanced Enter into the “Advanced” page Apply Complete the setting All Port Set all outputs from input 1~4 or off at once Advanced: www.zuum.life ZM1072020... - Page 11 Terminal connection users display, the max. 4 users online. Aliases: Aliases page can change input/output name, enter Apply to finish the setting after change the new name will update and correspond to SWITCH SETTING page Output / Input. Press Back jump back to advanced page. www.zuum.life ZM1072020...
- Page 12 MAC Filter can be setup as registered MAC Addresses to link MATRIX host Web UI. The max is up to 10 MAC address groups. After MAC Address fill in, select Enable and press Apply to complete the setting. Press Back jump to advanced page. Scene: www.zuum.life ZM1072020...
- Page 13 Weight 4.85 Do you Need Technical Support? ZUUM is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit www.zuum.life www.zuum.life...
Need help?
Do you have a question about the H4X4-4K18G and is the answer not in the manual?
Questions and answers