Page 1: Table Of Contents
Safety instuctions Istallation Operation and maintenance Product introduction Operation of product How to use Heat settings Cooking guidelines Care and cleaning Troubleshooting Error codes Warranty Special declaration Thank you for selecting our product. Please read this instruction manual carefully before operation and keep this manual well for reference in the future.
Page 2: Safety Instuctions
Foreword Your safety is important to us. Please read this information before using your cooktop. Important safety instructions Never use your appliance as a work or storage surface. Never leave any objects or utensils on the appliance. Do not place or leave any magnetisable objects (e.g. credit cards, memory cards) or electronic devices (e.g.
Page 3: Istallation
WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 4: Operation And Maintenance
Connecting the hob to the mains power supply 120V~ a) The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown below. b) For power cord with plug, it can be used directly. 1.
Page 5: Product Introduction
Hot surface hazard During use, accessible parts of this appliance will become hot enough to cause burns. Do not let your body, clothing or any item other than suitable cookware contact the Ceramic glass until the surface is cool. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot Keep children away.
Page 6 Before using your new induction cooktop Read this guide, taking special note of the ‘Safety Warnings’ section. Remove any protective ﬁlm that may still be on your ceramic glass. Technical speciﬁcation Model RC-2DEE84 Cooking Zones 2 Zones Supply Electric Power 1800 W...
Page 7: Operation Of Product
Operation of product Touch controls The controls respond to touch, so you don’t need to apply any pressure. Use the ball of your ﬁnger, not its tip. You will hear a beep each time a touch is registered. Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them.
Page 8: How To Use
The method of working for 1# cooking zone is the same as the 2#; Now we give an example to tell how to use the cooking zone. Touch tho ON/OFF control to turn it on, all the indicators show up. ON/OFF After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the ceramic hob has entered the state of standby mode.
Page 9: Heat Settings
Select a heat setting by touching “-” or “+” control . By holding down either of these buttons, the value will adjust up or down. If you don’t choose a heat setting within 1 minute, the induction cooktop will automatically switch oﬀ. You will need to start again at step 1. You can modify the heat setting at any time during cooking.
Page 10 Locking the controls You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on). To lock the controls Press both buttons at the same time. Red light will indicate that the Lock mode is activated. To unlock the controls Press both buttons at the same time for 15 seconds.
Page 11: Cooking Guidelines
Program control Press Programa button, with can adjust delay timer. Function range: 10 min to 24 hours. PROGRAMA ON/OFF control Turn the whole cooktop oﬀ by touching the ON/OFF control. ON/OFF Cooking guidelines Choose a pan or utensil with a ﬂat base compatible with induction. Please remember that using small amounts of oil when frying will cause the temperature to rise quickly and this might activate the overheating temperature protection, to avoid this, please use the Temp function.
Page 12: Care And Cleaning
Care and cleaning Everyday soiling 1. Switch the power to the When power on glass induction cooktop oﬀ. cooktop is switched oﬀ, there (ﬁngerprints, 2. Apply a cooktop cleaner while will ‘hot surface’ marks, stains the glass is still warm (but not indication but the cooking left by food or hot!)
Page 13: Troubleshooting
Troubleshooting Problem Possible causes What to do? The cooktop No power. Make sure induction cannot Be cooktop is connected to the turned on. power supply and that it is switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call a qualiﬁed technician.
Page 14: Error Codes
Error codes Indicates that is not an utensil placed on the glassplate, or that utensil is not apropiate for induction. The main sensor was activated as a protection mode. Unplugged from the power supply, wait 10 seconds and then plugged again, if the problem persists, please contact our service center.
Page 15: Warranty
Warranty If problems occur with the product, please contact our speciﬁc repair and maintenance site or service center. Two years guarantee for all its components in factory defects. The starting warranty date refers to the invoice opening date of the product. Any problems cause by the following items is not included in the warranty: 1.