Download Print this page
Banzai AQUA BLAST BUMPER BOATS Manual

Banzai AQUA BLAST BUMPER BOATS Manual

Advertisement

Quick Links

AQUA BLAST
BUMPER BOATS
1.
Controller Units with Water Blaster x 2
3.
4.
Propeller Units x 2
I
II
Parts
3
and
4
are shipped
together and must
be separated
before assembling
this item.
IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5-10
ADULT SET UP IS REQUIRED.
2.
Inflatable Bumper Boats x 2
Pipe Covers x 2
5.
Repair Patch x 1
A
III
3
Press the release
latches (A) and
push
3
downward
while pulling up
4
part
4
.

Safety Information

WARNING!
To avoid the risk of serious injury or death:
• Intended for only children aged 5-10.
TM
• Adult supervision required.
• Adult assembly required.
• Do not hang on, stand on or tackle this product.
• Do not use a high-pressure air pump to inflate.
• Do not use electric air pump if water or moisture is
present. This may result in electric shock.
• Use product in swimming pool only.
• Never drive this product over other swimmers.
• This product is intended to be used as a toy and not
as a personal flotation device.
• Do not allow anyone over 100 lb (45 kg) to use this
product.
• Read all instructions before using this product.
• All safety warnings and instructions should be
followed when the product is in use.
• Correctly follow all instructions and safety require-
ments shown in this manual; otherwise injury or
death, especially for children, could result.
• All inflatables are temperature sensitive, therefore
never unfold or inflate in temperatures below 50°F
(10°C).
• Once inflated, make sure that the product does not
come in contact with stones, gravel or other sharp
objects, which could puncture the inflatable.
• There should be a minimum of 6 ft (183 cm)
between the product and the swimming pool wall to
prevent the possibility of the child falling off and
hitting their head on the edge of the pool's wall.
• To prevent premature material fatigue, refrain from
exposing the product to unnecessary sunlight. Over
exposure to sunlight may cause leakage.
• Stop using Aqua Blast Bumper Boats™ if there is
any damage to the propeller safety cage.
• Once assembled according to the instructions
provided, confirm that this battery-operated toy is
fully functional before placing in the water.
• This is not a lifesaving device. Do not leave a child
unattended while the device is in use.
• Do not shoot water blaster cannon directly at
person's eyes or face.
• Fill with clean, cold tap water only. (Other liquids
may be harmful to people and the water blaster.)
• Do not insert anything inside nozzle.
• Do not attempt to alter the nozzle. (This may
damage the product and will not function properly.)
• Do not allow sand or dirt to get inside the tank or
nozzle. (Salt water and sand are harmful to the
water blaster.)
• Only to be used in water in which the child is within
its depth and under supervision.
• Not suitable for children under 36 months due to
small part. Choking hazard.
• Keep away from fire.
While every attempt is made to embody the highest
degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all
risk of injury resulting from use. All merchandise is
sold on this condition, which no representative of the
company can waive or change.
REPAIR PATCH INSTRUCTIONS
For your convenience, a repair patch has been
included to repair holes in the inflatable section.
Do not use the patch for holes or rips on the seam.
In the event of an accidental puncture, cut out a
suitably sized patch, making sure you round the
corners of your repair patch to avoid peeling. Make
sure the area to be patched is clean and dry. Press
patch firmly over the puncture. Do not inflate for 20
minutes.
The repair patch should be applied by an adult.
1

Advertisement

loading

Summary of Contents for Banzai AQUA BLAST BUMPER BOATS

  • Page 1 The repair patch should be applied by an adult. exposing the product to unnecessary sunlight. Over exposure to sunlight may cause leakage. • Stop using Aqua Blast Bumper Boats™ if there is IMPORTANT SAFETY INSTRUCTIONS. any damage to the propeller safety cage.
  • Page 2 4. Place the battery box back inside the controller unit and screw on the top cover with a screwdriver. BANZAI IS USED UNDER LICENSE BY FOCUS BRAND LTD. 5. To replace batteries, make sure to remove the Aqua Blast Bumper Boats™ from the swimming pool, unlock CONTENTS AND SPECIFICATIONS MAY VARY FROM the controller unit from the Aqua Blast Bumper Boats™...
  • Page 3 4. Inflate the Aqua Blast Bumper Boats™ with air until it is halfway full. See diagram for air chamber locations. 7. Insert the propeller unit into the pipe cover from underneath the Aqua Blast Bumper Boats™. You will hear the unit click into place when it is properly inserted.
  • Page 4 4. To shoot the water blaster, hold down the trigger on the left handle. NOTE: Always store the Aqua Blast Bumper Boats™ in a dry place. Never leave in the pool or outside when 5. IMPORTANT: To prevent overheating, the Aqua Blast Bumper Boats™ may automatically shut down for not in use.