Adagio Inspiration Falls Assembly/Mounting Instructions

Adagio Water Features Inspiration Falls Assembly & Mounting Instructions
Congratulations on your purchase of an Adagio water feature! We are confident it will bring peace and
tranquility into your home by bringing the sights and sounds of nature to you. It will also act as a natural
humidifier. Chances are that you have already designated a wall for your new fountain. It is essential when
choosing this location that there is a power source and a sturdy, mounting surface. Before you install your
fountain, decide where you are going to plug in the electrical cord that comes with it. You have two options
for plug-in points: We suggest a standard wall outlet placed behind the stone in order to hide the cord. We
recommend having an electrician or licensed contractor install this outlet for you. Once you have decided
the location of the fountain, make sure the outlet is placed at least 18 inches above the bottom of the tray
and more than 24 inches below the top of the hood. In other words, place the outlet near the middle of the
fountain. Your fountain measures 69 inches from the bottom of the tray to the top of the hood. The hood
and tray are each 30 inches wide and the stone is 60 inches high by 26 inches wide. These measurements
will help you in deciding the location of the fountain on the wall and placement of the outlet. It is
recommended that your new outlet be wired to a wall switch so that you can easily turn it off and on. Do
not use a recessed outlet since our plug is flat and may not fit into the recessed box.
If you do not want to place an additional outlet behind the fountain just make sure there is an outlet close
by.
IMPORTANT: If you have purchased an Inspiration Falls with the Green Stone, the above measurements
of length will be 12 inches shorter. The Green Stone is 48 inches tall while the Multi-color or the Black
stones are 60 inches tall. The width is the same on all stones, hoods and trays.
1 of 7