Operation By Remote Control - Color Block Color Cube CBLIGHTSPKS User Manual

charge hole and cap

OPERATION BY REMOTE CONTROL

NOTE: First remove the small plastic sheet from the battery cover before below operation
1. Brightness intensity and speed button :
Adjust the speed under smooth modes. Change
one single color.
2. Light ON/OFF button: Press this button to
step for all functions on remote control.
Once the color cube is power on, press ON/OFF
lighting, If theBluetooth is connected, Press ON/OFF button does
function when electricity is not exhausted.
The light could keep the same lighting working mode or color
button, the mode will still be on "RED" mode.
When electricity is used exhausted last time, there will be no
memory storage function. After fully charged, you press the
ON/OFF button, the initial mode is on "SMOOTH" mode.
photo 1
ON
OFF
ON
OFF
Charge indicator, charging
indicator light will be on red.
Charging indicator light will be
turned to green after full charged
photo 2