IMPORTANT SAFETY INSTRUCTIONS: When using electrical appliance. Basic safety precautions should always be followed including the following: READ ALL INSTRUCTIONS BEFORE USING All components need to be installed in accordance with the user manual instructions for correct performance of unit. ...
Page 3
DO NOT operate the unit in bathrooms or other humid environments. DO NOT operate where aerosol (spray) products are being used, or where oxygen is being administered. Do not operate the unit without filters. Do not operate the product in any greasy environment, such as in the kitchen.
Page 4
FEAUTURES 3-Stage purification process The 3-layer filter contains a Pre-filter, activated carbon filter and HEPA filter. The Pre-filter traps larger particles such as dust, pet hair and large-sized allergens. The Activated carbon filter absorbs common household odours, cigarette odours and smoke.
Page 5
Filter change indicator Indicator of corresponding filter will illuminate indicating that the filters need to be replaced. To reset the indicator after the filter has been replaced, press together TIMER and ION button for 3 seconds. Timer Programmable timer to turn off the unit after a pre-set amount of time.
Page 6
PARTS A. Air inlet grille B. Pre-filter C. Activated carbon filter D. HEPA filter E. Control Panel F. PM2.5 indicator G. Air outlet H. Dust sensor I. Air inlet...
Page 8
HOW TO USE IMPORTANT! Before first use, open air inlet grille by placing your hand in the recess of the side panels then gently pull the bottom part of the grille towards you to release interlock at position (1). Then lift up the grille to detach grille hooks at position (2), refer to below.
Fan speed To select speed, press SPEED button repeatedly until the desired fan speed is illuminated on the control panel. Fan speed will cycle from Low, Med High and Turbo. Auto mode To set Auto mode, press AUTO button until the AUTO icon illuminates.
To prevent overheating DO NOT mix new and old batteries in the remote control. To prevent corrosion, remove the batteries if the remote control is not used for a long period of time. CLEANING AND MAINTENANCE Caution: Before cleaning the unit, turn off the unit and unplug from the mains supply.
Page 11
Use dry cotton swab to dry it. Re-install protective cover to dust sensor. Cleaning the Pre-filter, Activated carton filter and HEPA filter Turn off and unplug the unit. Release the air inlet grille first. Place your hand in the recess of the side panels then gently pull the bottom part of the grille towards you to release interlock at position (1).
Pull out the filters one by one with the fabric belt attached. Run a vacuum cleaner with brush attachment on low power setting along the Pre-filter, carbon filter or HEPA filter to pick up the dust and various particles. ...
Page 13
Press TIMER and ION buttons together for 3 seconds to reset Filter Change Indicator. IMPORTANT! When placing the filters back into the air purifier, ensure the air inlet grille had locked into place or the unit will not turn ON.
TECHNICAL DATA MODEL NO. KJ300GR-G1E VOLTAGE 220-240V POWER CONSUMPTION 60 Watt CLEAN AIR DELIVERY 320m³/h RATE COVERAGE AREA 22-38m² TROUBLESHOOTING Some problems may be caused by minor faults that you can be corrected yourself. To do so, follow the instructions in the following table.
Page 15
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the KJ300GR-G1E and is the answer not in the manual?
Questions and answers