er Manual Index Important Safety Information..................... 3 Identification of Key Parts......................4 Circuit Diagram........................... 4 Installation of Your pizza Oven.....................5 Before Using Your Oven.......................5 Using Your Oven..........................5 Typical Operation Sequence......................6 Timer............................6 Temperature Control Knob......................6 Power and Heating Indicator Light....................7 Protection Component.........................7 Cleaning and Maintaining Your Oven...................
IMPORTANT SAFETY INFORMATION When using electrical appliances, basic safety precautions should always be followed including the following: Read all instructions carefully and completely. For commercial use only. Do not touch hot surfaces. Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
Identification of Key Parts 1. Front door 2. Pizza stone 3. Handle 4. Heating element separate switches 5. Light switch 6. Timer knob 7. Temperature knob 8. Temperature belt Circuit diagram 4 / 7...
INSTALLATION OF YOUR OVEN All electrical connections must comply with specification and power standard. The installation operation must be done by qualified personnel. All models are countertop type. Place the oven on a flat surface and leave 4” on all sides for the air ventilation. BEFORE USING YOUR OVEN Before cooking anything in your oven for the first time, please follow these simple instructions: Using a small amount of detergent, clean the handle and pizza stone with soapy water.
Typical Operation Sequence ACTION RESULT Power is connected but power light will go on after Plug in your oven turning the temperature dial Heating indicator light comes on; heating elements Adjust temperature control knob begin to heat up Temperature light shuts off Oven has reached desired temperature Load product into oven Product will begin to cook...
Power Indicator Light Any time this appliance is connected to the power supply and the power switch is turned on, the fan motor will begin to operate at the same time. The power indicator light will be on when the operator sets the temperature and time. Protection Component If the temperature of this oven reaches an unsafe limit, the electrical components will shut off and it will stop operating in order to prevent overheating.