Outsunny B30-006 Instructions

Outsunny B30-006 Instructions

Advertisement

Quick Links

B30-006
EN
C000000
These instructions describe the correct operating method to ensure prolonged service life. Please read
and completely understand these instructions before operating your solar light.
Keep these instructions for future reference.

INTRODUCTION

Using LED (Light Emitting Diode) technology and powered by the sun, this solar light is ideal for
highlighting garden contours,pathways and driveways. During the day, the solar panel on top of the
light charge the battery inside. At dusk, the solar light will turn on automatically using the stored
energy from the sun.
The unique High /Low switch is designed to maximise brightness during summer, and maximise
operating time during winter and over extended cloudy periods.
When the switch is in the High position, the brightness can reach up to 60 lumens and will last up to
6 hours each night when the battery is fully charged.
In the Low position, the brightness can reach up to 30 lumens and up to 8 hours working time.

POSITIONING YOUR SOLAR LIGHT

*Your solar light includes a built-in photo sensor, which detects the level of surrounding natural light
and controls when the light will automatically switch on and off. Solar light should be placed away
from other night time light sources including other solar lights, as this might keep the light from
automatically turning on at dusk.
*Solar light must be located in an area where the solar panel will receive a maximum amount of full,
direct sunlight every day. Solar light should be exposed to at least 8 hours of direct sunlight each day
to fully charge the battery inside.
Shady locations will not allow the battery to charge fully and will reduce the hours of night time
light.
The performance of your solar light is dependent on your geographical location, weather
conditions and seasonal lighting availability. On cloudy days and during winter,your solar light
will not receive as much direct sunlight, resulting in reduced brightness and reduced operating
time.

ASSEMBLY

This pack should come with the following.
NB:Some components may come pr-assembled

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B30-006 and is the answer not in the manual?

Questions and answers

Summary of Contents for Outsunny B30-006

  • Page 1 B30-006 C000000 These instructions describe the correct operating method to ensure prolonged service life. Please read and completely understand these instructions before operating your solar light. Keep these instructions for future reference. INTRODUCTION Using LED (Light Emitting Diode) technology and powered by the sun, this solar light is ideal for highlighting garden contours,pathways and driveways.
  • Page 2 1 x solar light head (A) 1 x pole piece with female thread (B) 2 x pole pieces with female& male thread (C) 1 x pole piece with male thread (D) 1 x mounting base (E) 1 x ground stake (F) 3 x mounting screws (G) 3 x plastic anchors(H)
  • Page 3 Step 1: Assemble lens section and cover together, by aligning the locking tabs on the side of the lens section with the slots on the underside of the light head, and twist over in a clockwise direction to lock it into place. Step 2: Assemble the poles with threaded ends.
  • Page 4 BATTERY REPLACEMENT Step 1: Detach light cover from the top of the lens section by twisting it in an anti-clockwise direction and gently lifting off. Step 2: Lift off the battery lid and replace old battery with new rechargeable 3.7V 14500 Lithium-ion battery.

Table of Contents

Save PDF