Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Quest Engineering Cloud Control Base
- Page 1 CONTROL CLOUD...
-
Page 2: Let's Get Started
WELCOME. LET’S GET STARTED. This guide describes how to start using your Quest Cloud Control immediately. If you read nothing else, read this guide. For detailed information on your controller, visit www.questclimate.com Incorrect installation can void your warranty. -
Page 3: Pre-Installation
COMPATIBILITY PACKAGE CONTENTS Cloud Control works with over 95% of 120V systems including lighting, heating Cloud Control Base Model and air conditioning, ventilation blowers, pumps, lights, dehumidifiers, fogger/ Part Number 4041550 humidifiers, water chillers, heaters, fans, or just about any other electrical device. - Page 4 CLOUD MODULE The Cloud Module is the brain of your smart farm. It manages your farm automation system, allowing the equipment in your farm to work together — from lighting and HVAC, to CO2 and irrigation, and pretty much anything else in between. Use the enclosed mounting hardware to mount it to any flat surface.
- Page 5 PREMIUM SENSOR The Premium Sensor Module includes sensors for relative humidity, barometric pressure, air temperature, vapor pressure, CO2 and light. Locate the sensor in a clean and dry location where it will sample non-stagnant air. If you are utilizing the light sensor for sun sensing, ensure the light sensor has a clear path to the sun or light source.
-
Page 7: Extension Cable
CLOUD CONTROL ACCESSORIES TEMP/RH SENSOR The Temp/RH Sensor is used for sensing temperature and relative humidity of a space. This sensor plugs into the Cloud Module. 24V SWITCH The 24V Switch can connect to the terminal block on Quest products. Once wired, the switch allows your Quest Dehumidifier to be controlled via the Cloud Control app. - Page 8 DOWNLOAD QUEST CLOUD CONTROL APP To set up and configure the controller, you will need to install the Cloud Control App from either the Apple App Store or Google Play Store. LAUNCH APP Launch the App and follow the onscreen instructions to setup your new account and connect your controller to your Wi-Fi.
- Page 9 SET UP THE CLOUD CONTROL Step 1: Mounting the Cloud Control Mount the controller to any wall near the wireless access point and plug it in with the included 12V Power Adapter. Step 2: Mounting the Sensor Module Locate the Premium Sensor(s) in a clean and dry location where it will sample non-stagnant air.
- Page 10 DEVICES The Devices tab shows you the current status of any device connected to your system. You can also override or force the device either on or off. Indicates the device is in Auto Mode and Turned On because of an active Rule. Indicates the device is in Auto Mode and Turned Off because of an active Rule.
-
Page 11: Status Indicators
STATUS INDICATORS Breathing Green Your Controller is connected to the internet. When it is in this mode, you can call functions via the App. Blinking Green The Controller is trying to connect to the internet. If it continues to blink for several seconds, make sure that your internet service is working, then try resetting your Controller. - Page 12 CONTACT US QU ES TC LI MAT E.COM 1 -87 7 -4 20-1 330 T S-1134 3/2 0 RE V B...
Need help?
Do you have a question about the Cloud Control Base and is the answer not in the manual?
Questions and answers