Table of Contents
Advertisement
Quick Links
PRIOR TO INSTALL
The BFL is designed to be installed on either a pole laying on
the ground, or on top of an erected pole. Ensure install location
averages 2 to 3 hours of direct midday sun exposure for best
performance. Please handle fixture and solar engine with care
as scratches will affect appearance and powder coat durability.
TOOLS REQUIRED
• 5/32" hex bit
• 9/16" socket
• Torque wrench
• Electrical Fishtape
1. PLACE SOLAR ENGINE ON POLE
Ensure to completely insert tenon into the solar
engine.
Solar Engine
3. AIM AND SECURE SOLAR ENGINE
Rotate solar engine such that the green arrow points
south. Use 5/32" bit to torque the 4x set screws to 86
in-lb.
Point Green
Arrow South
First Light Technologies Document
70-0058 | 26 March 2020
© First Light Technologies Ltd.
INSTALL INSTRUCTIONS
BFL-S SERIES STREET LIGHT
Tenon
Tighten
Set-Screws
2. OPEN SOLAR ENGINE
Press the blue button on the side to unlock. Once
opened, prop stick will automatically engage to keep lid
open.
Push To
Unlock
4. PLACE FIXTURE ON ARM AND OPEN FIXTURE
Press the button on the underside of the fixture to
unlock.
Fixture
1
Push To
Unlock
Arm
www.firstlighttechnologies.com
info@firstlighttechnologies.com
Toll Free 1-844-279-8754
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for First Light BFL-S Series
- Page 1 INSTALL INSTRUCTIONS BFL-S SERIES STREET LIGHT PRIOR TO INSTALL The BFL is designed to be installed on either a pole laying on the ground, or on top of an erected pole. Ensure install location averages 2 to 3 hours of direct midday sun exposure for best performance.
- Page 2 Ensure the blue end is in the solar engine, and the yellow end is in the fixture. If using a First Light pole (sold separately), there is a rear hand hole to aid in running wires. Coil any excess luminaire harness inside the BFL enclosure before connecting.
Need help?
Do you have a question about the BFL-S Series and is the answer not in the manual?
Questions and answers